GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-PC75
1756-PC75
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-PC75 1756-PC75//A1756-PC75//B
Common misspellings:
- l756-PC75
- 1756PC75
The 1756-PC75 is a 48 Volts DC ControlLogix Standard Power Supply manufactured by Allen-Bradley. The Allen-Bradley 1756-PC75 ControlLogix is part of the ControlLogix Standard Power Supply Series. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply features 20 Amps maximum inrush current, 48 Volts DC nominal input voltage, 95W maximum power rating, 75W at 60 degrees Celsius power output, a 30 to 60 Volts DC operating voltage range, a T4 North America designated temperature code, and the ControlLogix Standard Power Supply comes in an open-style enclosure. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply is configured with a 1756 chassis to provide 1.2 Volts, 3.3 Volts, 5 Volts, and 24 Volts DC power to the 1756 chassis backplane (standard chassis series B) and it is approximately 14.0 x 11.2 x 14.5 centimeters in dimensions and the weight is around 0.95 kilograms. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply has an operational thermal dissipation of 68.2 BTU/hour. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply circuit hold-up time for the nominal signal is 50 milliseconds at 30 to 60 Volts DC.
The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply offers 15 Amps maximum user-supplied over-current protection and circuit protection to a circuit-soldered non-replaceable fuse. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply has a circuit isolation voltage of 250 Volts DC (continuous) with reinforced insulation tested at 3500 Volts DC for 1 minute in-between the power input and backplane. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply has a load-dependent current carrying capacity of 1.5 Amps at 1.2 Volts, 13 Amps at 5.1 Volts, and 2.8 Amps at 24 Volts DC. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply is installed on the left side of the 1756-A4, 1756-A7, 1756-A10, 1756-A13, and 1756-A17 chassis. The Allen-Bradley 1756-PC75 ControlLogix Standard Power Supply features a 0 to 60 degrees Celsius operational temperature range, 5 to 95% non-condensing relative humidity, a non-operational storage temperature limit between -40 and 85 degrees Celsius, a shock rating of up to 50g in operational mode and of 30g when in the non-operating mode.
