GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-PB75
1756-PB75
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-PB75 1756-PB75//A1756-PB75//B
Common misspellings:
- l756-PB75
- 1756-P875
- 1756PB75
The 1756-PB75 is a 24 Volts DC ControlLogix Standard Power Supply manufactured by Allen-Bradley. The Allen-Bradley 1756-PB75 ControlLogix is part of the Logix5000 series of controllers. The Allen-Bradley 1756-PB75 ControlLogix features ratings of 19.2 to 32 Volts DC power, 20W, 13 Amps, a 1-on power ports wire category, a status LED display, 68.2 BTU/Hour power-dissipation, and 0.8 N-m conductor screw torque. The ControlLogix Standard Power Supply consists of an open-style enclosure type rating. The Allen-Bradley 1756-PB75 ControlLogix requires 2.5 mm² (14 AWG) stranded copper wire rated at 90 degrees Celsius, a 1756 I/O backplane chassis that provides a high-speed communication path between the ControlLogix Standard Power Supply, and other ControlLogix modules. The Allen-Bradley 1756-PB75 ControlLogix offers discrete, drive, motion, process, and safety control together with communication and state-of-the-art I/O in a relatively small and cost-effective package. The Allen-Bradley 1756-PB75 features removable terminal blocks which provide a flexible interconnection between the user plant wiring and the Allen-Bradley 1756-PB75.
The Allen-Bradley 1756-PB75’s environmental specifications include an operating temperature of 32 to 140 degrees Fahrenheit, a maximum surrounding air temperature of 140 degrees Fahrenheit, a non-operating temperature of -40 to 185 degrees Fahrenheit, and 5 to 95% non-condensing relative humidity. The Allen-Bradley 1756-PB75 ControlLogix feature 2g at 10 to 500 Hertz operating vibrations, an operating shock rating of 30g, a non-operating shock rating of 50g, an emissions class of IEC 61000-6-4, ±1 KV line-line (DM), and ±2 KV line-earth (CM) on the power ports surge transient immunity. The Allen-Bradley 1756-PB75 ControlLogix provides a scalable controller solution that can address a large number of I/O points. The ControlLogix Standard Power Supply can be placed into any slot of a ControlLogix chassis and installed with other controllers on a single chassis. When the Allen-Bradley 1756-PB75 ControlLogix is connected with other controllers on one chassis; the Allen-Bradley 1756-PB75 ControlLogix communicates with each controller over the backplane chassis, but the Allen-Bradley 1756-PB75 ControlLogix operates independently. The Allen-Bradley 1756-PB75 ControlLogix is capable of communicating through the EtherNet/IP, ControlNet, DeviceNet, DH+, Remote I/O, and RS-232-C networks.
