GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-OF8H
1756-OF8H
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1756-OF8H module is an Allen-Bradley/Rockwell Automation output analog module component intended for industrial use. The module provides 8 outputs for voltage and current power and it includes a HART modem.Other Available Revisions for the 1756-OF8H 1756-OF8H//A
Common misspellings:
- l756-OF8H
- 1756-0F8H
- 1756-OFbH
- 1756OF8H
The Allen-Bradley 1756-OF8H analog output module comes with 8 differential outputs plus a HART modem. This module, which belongs to the ControlLogix series, has a selectable voltage or current rating that ranges from -10.4336 to 10.4336 Volts and 0 to 21.2916 milliamps. Its overall output is rated at ±10 Volts or 0 to 20 milliamps while its signal resolution is 15 to 16 bits. The module also has an overall backplane power of 6.54 Watts and a voltage range of 10 to 10.4 Volts or 0 to 20 milliamps and 4 to 20 milliamps. Its thermal dissipation is rated at 16.78 BTU per hour while its power dissipation is 4.92 Watts. Unlike other analog input or output (I/O) modules, the 1756-OF8H comes with an open circuit detection feature and it has a specified circuit detection time of 0.1 milliamps or less.
The device also features an isolation voltage of 50 Volts with basic insulation meticulously tested at 1500 Volts AC for 60 seconds between the backplane and output channels. Besides, the 1756-OF8H offers over-voltage protection and it has a maximum settling time of 23 milliseconds without the HART, and a maximum of 37 milliseconds with the HART. Its voltage settling time starts at 8.5 milliseconds. This module’s calibration accuracy is 0.1% (voltage) and 0.15% (current), while its standard calibration interval is approximately 12 months. With an offset drift of 200nA per degree Celsius and a total module error of 0.15% (voltage) and 0.3% (current), the 1756-OF8H analog output is appropriate for various industrial applications. It utilizes mechanical keying, but the module’s keying can also be configured electronically. Its operating temperature is 0 to 60 degrees Celsius at 5 to 95% non-condensing relative humidity. The module, which is enclosed in an open-type chassis also comes with the IEC, T4 North America, as well as the ATEX temperature codes.
Technical Specifications for 1756-OF8H
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | ControlLogix |
| Part Number | 1756-OF8H |
| Product Type | Output Module |
| Outputs | 8 voltage or current outputs, one HART modem per module |
| Output Range | +/-10 Volts, 0 to 20 milliamps and 4 to 20 milliamps |
| Resolution | 15 to 16 bits for all ranges |
| Total Backplane Power | 6.54 Watts |
| Power Dissipation | 4.92 Watts |
| Maximum Overvoltage Protection | 24 Volts DC |
About 1756-OF8H
The catalog number 1756-OF8H is reserved for an Allen-Bradley/Rockwell Automation output module that is available through the ControlLogix series. The module operates in an analog mode and it can be used for both voltage and current output applications. The 1756-OF8H module has 8 outputs and it features 1 HART modem per module. The module has an output current range of 0 to 20 milliamps and 4 to 20 milliamps at +/-10 Volts and a resolution of 15 to 16 bits for all ranges. In addition to that, the 1756-OF8H module has a backplane current rating of 230 milliamps at both 5.1 Volts DC and 24 Volts DC.The 1756-OF8H module has total backplane power of 6.54 Watts and power dissipation rating of 4.92 Watts. The unit has a thermal dissipation rating of 16.78 BTU per hour and 50 Volts (continuous) isolation voltage for basic insulation. The module detects open circuits in the current mode, and it includes an overvoltage protection rating of +/- 24 Volts DC maximum. The 1756-OF8H output module has a scan time of 12 milliseconds minimum in analog mode and typical scan time of only 1 second in HART mode when a single channel is enabled. If all 8 channels are enabled for HART operation, the scan time should not be more than 10 seconds. The module includes electronic module keying, and it requires one slot in the chassis for installation. The 1756-OF8H module uses Category 2 copper wire on the signal ports. Additionally, the module has an open-style enclosure and a T4 temperature code rating.
F.A.Q for 1756-OF8H
