GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-OB8I
1756-OB8I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-OB8I 1756-OB8I//A
Common misspellings:
- l756-OB8I
- 1756-0B8I
- 1756-O88I
- 1756-OBbI
- 1756-OB81
- 1756-OB8l
- 1756OB8I
The Allen Bradley 1756-OB8I 8-point Digital DC Output Module is a digital output module for the Allen Bradley ControlLogix Controller, which is used for sharing high speed and process control output in many automated industrial applications. This module is located a ControlLogix chassis, and it requires Removable Terminal Block (RTB) or an Interface Module for installation and connection of all field side wiring. The 1756-OB8I has 8 individual isolated 24 Volt DC outputs, with an operating voltage range of 10 to 30 Volt DC, and with a total backplane power of 0.89 Watts. It draws 2 milli-Ampere minimum backplane current at 24 Volt DC and 165 milli-Ampere, and it has a maximum signal delay time of 1 millisecond from OFF to ON and 2 milliseconds from ON to OFF state. The 1756-OB8I has 0.5 milli-Ampere leakage current per output point, with 0.5 Volt DC voltage drop at 2 Ampere maximum output point current, and it has a maximum aggregate value of 16 A per module. It has 250 Volt voltage isolation between output to the backplane using reinforced insulation and between output to output using basic insulation both tested at 1350 Volt AC for 2 seconds. The 1756-OB8I like most 1756 I/O module is designed without a protective fuse, but it is recommended to install with fuse protected interface module which confers protection to the output module. This module is keyed to removable terminal block mechanically, and it has T4 factory designated temperature code. The 1756-OB8I has no rated enclosure and is designed to operate without derating at 0 to 60 degree Celsius (32 to 140 degree Fahrenheit) operating temperature and 5% to 95% non-condensing relative humidity. It can withstand 30G operational shock and is CE, UL, CSA, and C-TICK.
