GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-N2XT
1756-N2XT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-N2XT 1756-N2XT//A
Common misspellings:
- l756-N2XT
- 1756N2XT
The 1756-N2XT is a ControlLogix Slot filler module manufactured by Allen-Bradley under the ControlLogix series. The slot filler supports various communication ports which include the RS-232, RS-422, and RS-485 communication ports. The 1756-N2XT has a backplane current of 800 mA at 5 Volts while at 24 Volts, the backplane current is 3 mA. It has a SERCOS data rate of 4 or 8 Megabits per second and a power dissipation of 4 Watts. The current for the 1756-N2XT at 5.1 Volts is 1.2 Amps while the power dissipation is 6.2 Watts. The thermal dissipation is registered at 21.2 BTU per hour while the isolation voltage is 50 Volts continuous. It works in any slot location and it comes with the GOST_R and ROSTECHNADZOR certifications.
Ideally, the 1756-N2XT can be used on the 1756 ControlLogix chassis, allowing for the closure of the unused slots when using ControlLogix-XT Chassis. It is an application that offers safety and maintenance features. It comes with no enclosure, and the maximum current per point is 0.5 Amps at 60 degrees Celsius. The 1756-N2XT current per module at 60 degrees Celsius is 4 Amps. In addition, the slot filler comes with various key modules that includes the On, Off , Fault States Per Point, hold Last State, and also the States module in program mode. It comes mechanically fused and it has a slow-blow fuse belonging to the fused/group rated at 3.15 Amps at 250 Volts AC. The 1756-N2XT can be used at extreme temperatures and it offers high-performance ability. It comes with tight integration, reducing the cost of commissioning during normal operations. Offering high speed communication path module, the 1756-N2XT enables power distribution to each one of the modules in the 1756-N2XT chassis.
