GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-M08SEG
1756-M08SEG
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-M08SEG 1756-M08SEG//A
Common misspellings:
- l756-M08SEG
- 1756-Mo8SEG
- 1756-M0bSEG
- 1756M08SEG
The Allen-Bradley 1756-M08SEG is a SERCOS interface module with 8-axis support for ControlLogix platforms which is compliant with the extended pack profile. It is compatible with Kinetix drives including the 2094 Kinetix 6000 and the 2093 Kinetic 2000 multiple-axis drives. The 1756-M08SEG uses a digital optical-fiber link for connectivity with attached drives. The optical fiber link enables the replacement of a maximum of 18 digital wires per axis. Plastic and glass optical fiber cables can be used. The supported plastic fiber cables include the 2090-SCEPxx-0, 2090-SCVPxx-0 and the 2090-SCNPxx-0. The supported glass fiber cable is the 2090-SCGVxx-0.
The 1756-M08SEG’s optical fiber link supports data rates of 4 and 8 Mbps. The cycle times for a 4 Mbps data rate are 0.5 milliseconds (for 2 drives), 1 millisecond (for 4 drives), and 2 milliseconds (for 8 drives). The cycle times for an 8 Mbps data rate are 0.5 milliseconds (for 4 drives), and 1 millisecond (for 8 drives). The 0.5 milliseconds cycle time is supported by the Kinetix 6000 drives. Up to 8 drives are supported by the 1756-M08SEG and it is compatible with the extended pack profile. It supports the position control mode. The module takes up one slot in the 1756 chassis and it can be installed in any slot.The current drawn by the module at 24 Volts DC is 2.5 mA and at 5.1 Volts DC is 760 mA. The 1756-M08SEG is available as a non-enclosed module. The working temperature range is 0 to 60 degrees Celsius and the working relative humidity range is 5 to 95%.
