GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-M02AS
1756-M02AS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-M02AS 1756-M02AS//A
Common misspellings:
- l756-M02AS
- 1756-Mo2AS
- 1756M02AS
The Allen-Bradley 1756-M02AS is an analog servo interface drive with a Synchronous Serial Interface (SSI) feedback feature. The drive has a resolution range of between 8 and 31 bits. The 1756-M02AS provides a mechanism to interface the SSI outputs with transducers using RS-422 with 5 Volts differential signals. These signals comprise data generated by the transducer and a clock emanating from the controller. The 1756-M02AS is primarily developed to be used with drives or actuators requiring +/-10 Volts torque reference input. Unlike the differential encoder interface used by the 1756-M02A, the 1756-M02AS has a differential clock output and data return signals. The 1756-M02AS is part of the ControlLogix family of servo interface drives. Drives in this family provide for either an open-loop or a closed-loop motion control for compatible devices.
The 1756-M02AS supports an output load with a minimum impedance of 100 ohms. Also, the analog servo interface drive has a 208 or 625 kilohertz clock frequency, a binary or gray code transducer, and a response time rated at 1 servo update period which is user-calibrated between 250 and 2000 microseconds. The 1756-M02AS has other inputs (current sinking, optically isolated) a 24 Volts DC normal input voltage, a maximum and minimum on-state and off-state voltage of 17 and 26.4 Volts DC, and an input impedance of 7.5 kiloohms. The operating vibration and shock for the 1756-M02AS are rated at 2G and 30G, respectively, with the vibration tested at a frequency of between 10 and 500 Hertz. The non-operating shock for the 1756-M02AS is rated at 50G.
