GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-M02AE
1756-M02AE
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-M02AE 1756-M02AE//A
Common misspellings:
- l756-M02AE
- 1756-Mo2AE
- 1756M02AE
The Allen-Bradley/Rockwell Automation 1756-M02AE is an analog encoder servo module with 2 axes and quadrature feedback. The module occupies a slot in the 1756 ControlLogix chassis and it supports electronic keying. The 1756-M02AE dissipates a maximum of 5.5 Watts, it has a servo loop rate of either 5 or 20 kilohertz, a 32-bit floating point gain resolution, and an absolute position range of +/- 1 million encoder counts. The 1756-M02AE exerts a current load of 700 mA at 5 Volts DC and 2.5 mA at 24 Volts DC.
The 1756-M02AE analog encoder servo module has 5 Volts differential optically isolated inputs and a 531 ohms differential input impedance. At 24 Volts, the 1756-M02AE has a minimum and maximum on-state voltage of 18.5 Volts DC and 26.4 Volts DC, respectively, while at 5 Volts, the 1756-M02AE has a maximum and minimum on-state voltage of 5.5 Volts DC and 3.7 Volts DC, respectively. At 24 and 5 Volts DC, the 1756-M02AE has a maximum off-state voltage of 3.5 Volts and 1.5 Volts, and an input impedance of 9.5 kilo ohms and 1.2 kilo ohms, respectively. The 1756-M02AE has an analog voltage servo output that has a 16-bits voltage resolution and a voltage range of +/-10 Volts. Additionally, the servo output has a 25 millivolts maximum offset and an output gain error of +/- 4%. The 1756-M02AE has solid-state isolated relay contact outputs which have a maximum operating voltage and current of 26.4 Volts DC and 75 mA, respectively. The 1756-M02AE is UL, CSA, CE, and C-Tick certified. The analog encoder servo module should be stored within a temperature range of between -40 and 85 degrees Celsius and operated at environments with a non-condensing relative humidity ranging from 5 to 95%. A 36-slot removable terminal block (the 1756-TBCH and 1756-TBS6H) is used to make connections to the 1756-M02AE.
