GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-L55M24
1756-L55M24
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-L55M24 1756-L55M24//A
Common misspellings:
- l756-L55M24
- 1756-155M24
- 1756-L55M2A
- 1756L55M24
The Allen-Bradley 1756-L55M24 is a processor module for the ControlLogix systems platform which provides motion, safety, processing, and drive control. This module is also called a controller because of its function in the system, and it is very light, weighing approximately 0.8 pounds (0.36 kilograms). Due to the flexibility of the ControlLogix system, this compact processor can be installed in virtually any slot in the chassis – even if the chassis power is on. Furthermore, the users may choose to install and use more than one processor in the same chassis or in distributed locations. This option makes communication with other networks possible and much easier. The 1756-L55M24 has 3.5 MB of RAM with 3.5 MB nonvolatile memory which enables the use of the module without a battery. When connected to a power line rated at 5 Volts DC, the processor has a backplane current draw of 1.23 Amps, and a backplane current draw of 14 mA at 24 Volts DC. The processor module uses a 1756-BATM battery assembly which is mounted externally, and it includes a 1756BATA lithium battery and a cable which is 1 meter (3.28 feet) long and which is used to connect the housing to the processor.
When it comes to programming languages, the versatile 1756-L55M24 can operate with the SFC (Sequential Function Chart), relay ladder, structured text, and the function block langauges. Communication between the I/O is achieved using an integrated RS-232 serial port, though the users have the ability to choose other communication modules too (such as Ethernet or Remote I/O, for instance). The optimum operating temperature for the 1756-L55M24 ranges between 0 and 60 degrees Celsius (32 and 140 degrees Fahrenheit) with 5 to 95% relative humidity. Although the controller can be installed while the chassis power is on, the users still need to bear in mind that doing so in hazardous locations is extremely dangerous and could lead to an explosion. Hence, the users are advised to remove the system power prior to controller installation or removal.
