GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-IV32
1756-IV32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-IV32 1756-IV32//A
Common misspellings:
- l756-IV32
- 1756-1V32
- 1756-lV32
- 1756IV32
The 1756-IV32 is an Allen-Bradley authentic digital input module that comes with 32 inputs, arrange in 2 groups of 16 inputs. The module can be used with the ControlLogix 1756 chassis. However, before connecting the 1756-IV32 to the chassis, ensure that there is an RTB as well as a removable terminal housing. The unit can only be used with the 1756-TBCH RTB as well as the 1756-TBS6H RTB. The operating voltage range of this Allen-Bradley unit is 10 to 30 Volts DC and the source voltage is 12 to 24 Volts DC. The 1756-IV32 draws a current of 120 mA at 5.1 Volts and 2 mA at 24 Volts. Moreover, the unit is characterized by a 0.66-Watts total backplane power and a 24 Volts DC nominal input voltage.
Other important characteristics of the 1756-IV32 module include a continuous voltage of 250 Volts. The 1756-IV32 is also characterized by a maximum power dissipation of 4.1 Watts at 60 degrees Celsius and a thermal dissipation of 14 BTU/hour at the same temperature. The 1756-IV32 features a maximum inrush current of 250 mA that decays to <37% in 22 milliseconds (which is without activation). The module’s maximum input impedance is estimated at 8.6 kΩ at 30 Volts DC. The 1756-IV32’s backplane input delay times are in the following order: ON to OFF (a hardware delay of 540 microseconds to a maximum of two milliseconds) and from OFF to ON (a hardware delay of 350 microseconds to a maximum 1 milliseconds). Remember, when the unit is OFF, the maximum current it can draw is 1.5 mA. Also, in this OFF-state, it can only use a maximum voltage of about 5 Volts DC.
