GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-IB16D
1756-IB16D
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-IB16D 1756-IB16D//A
Common misspellings:
- l756-IB16D
- 1756-1B16D
- 1756-lB16D
- 1756-I816D
- 1756-IBl6D
- 1756IB16D
The Allen-Bradley 1756-IB16D is a ControlLogix DC Digital I/O Module. This is 10 to 30 Volts DC Diagnostic Input Module. It provides diagnostic features to the one channel level. The module provides fault diagnostics and timestamp reporting to the controller. This Bulletin 1756 module is mounted to a ControlLogix chassis. The 1756-IB16D houses 16 diagnostic inputs (4 groups with 4 points each). To connect field-side devices to it, you will have to use either an RTB or a 1492 series wiring IFM. Operators can use the 1756-TBCH and the 1756-TBS6H RTB housings with this module.
The diagnostic timestamp resolution of the module is 1 milliseconds. The module draws 3mA at 24 Volts DC. The maximum surrounding temperature for this diagnostic input module is 60 degrees Celsius (140 degrees Fahrenheit). The 1756-IB16D is certified with the CE, UL, CSA, and C-Tick certifications. The Allen-Bradley 1756-IB16D module has status indicators for optimal user interfacing. Users can determine if their inputs are in a normal operating state over the OK status indicator. The steady green light of this indicator says that all of the inputs are working correctly. A flashing red light indicates that the users must check the communication system and a steady red light indicates that a faulty module must be replaced. There are 16 I/O status lights that turn yellow when an input (from 0 to 15) is turned on. If some input has encountered a fault, its status LED light will turn red. Besides these status indicators on the front of the module, there is also a locking key.
