GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-EN2T
1756-EN2T
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-EN2T 1756-EN2T//A1756-EN2T//B1756-EN2T//C1756-EN2T//D
Common misspellings:
- l756-EN2T
- 1756EN2T
The 1756-EN2T is a communication module from the 1756 ControlLogix product line by Allen-Bradley/Rockwell Automation. The module is a copper EtherNet/IP bridge supporting up to 256 Logix connections. Like other modules from the ControlLogix family, this module also has a communication rate of 10/100 megabits per second and a 30 Volts (continuous) isolation voltage. Furthermore, the isolation voltage has the basic insulation type, Ethernet to Backplane/USB to Backplane/USB to Ethernet connections, and it is type-tested at 980 Volts AC for 60 seconds. In addition, the 1756-EN2T communication module has a 1.0 Amp current draw at 5.1 Volts DC and a power dissipation of 6.2 Watts. Also, the 1756-EN2T model has a thermal dissipation of 17.4 BTU per hour. This communication module with a single slot width can be found as part of the chassis and it does not require a special slot place.
The 1756-EN2T module is designed for and works perfectly with ControlLogix chassis and both standard and redundant power supplies. Chassis models that can be used with this communication module are the 1756-A4/A7/A10/A13 and –A17. In addition, the module has 1 RJ45 Category 5 Ethernet port and a USB 1.1 port with full speed at 12 megabits per second. The module does not have a rated enclosure since it is an open-type device, and its operating temperature range is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The storage temperature of the module ranges from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) and it operates in environments with a non-condensing relative humidity of 5 to 95%. Also, the 1756-EN2T communication module can withstand 2 grams at 10 to 500 Hertz vibration and 30 g of shock when operating. The module is certified according to various standards for controllers and similar industrial equipment. The included certifications include the c-UL-us, CE, CSA, RCM, FM, Ex, EAC, KC and EtherNet/IP standards.
Technical Specifications for 1756-EN2T
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | ControlLogix |
| Part Number | 1756-EN2T |
| Product Type | Communication Module |
| Primary Network | Ethernet/IP |
| Additional Networks | DeviceNet and ControlNet |
| Communication Speed | 10 to 100 Mbps |
| TCP/P Connections | 128 |
| Logix Connections | 256 |
| Operating Temperature | 32 to 140 degrees Fahrenheit |
About 1756-EN2T
The Allen-Bradley 1756-EN2T module is an Ethernet module that is made for communicating with other devices through the Ethernet network. The 1756-EN2T communication module is part of the Allen-Bradley ControlLogix series. It has a slot width rating of just 1 slot and it can be installed in any available slot in a ControlLogix chassis. Its power dissipation rating is 6.2 Watts per hour and its thermal dissipation rating is 21.28 BTU per hour. The 1756-EN2T communication module can communicate over the Ethernet/IP network at speeds of 10 to 100 Mbps. The integrated communication ports that are found on this module include the USB 1.1 port and the RJ45 port.
The Allen-Bradley 1756-EN2T Ethernet communication module operates in a temperature range from 32 to 140 degrees Fahrenheit or 0 to 60 degrees Celsius. It is well suited to motion control, time synchronization, and real-time control applications. This communication module can handle as many as 128 TCP/IP connections and as many as 256 Logix connections at a time. The 1756-EN2T communication module can also connect to SCADA devices, a programming workstation, an HMI or Human-Machine Interface, and several kinds of 3rd-party devices all at the same time. It is designed to support a linear network topology. The 1756-EN2T communication module can communicate through the DeviceNet network and the ControlNet network as well as through the Ethernet/IP network, which is an open protocol that allows for a high degree of flexibility.
The 1756-EN2T Ethernet module from Allen-Bradley can communicate through the Ethernet/IP, DeviceNet, and ControlNet network protocols. It is part of the Allen-Bradley ControlLogix series.
F.A.Q for 1756-EN2T
