GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-CNBR
1756-CNBR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-CNBR 1756-CNBR//A1756-CNBR//B1756-CNBR//C1756-CNBR//D1756-CNBR//E
Common misspellings:
- l756-CNBR
- 1756-CN8R
- 1756CNBR
The 1756-CNBR ControlLogix is an Allen-Bradley Redundant Bridge Interface Module that facilitates communication inside a ControlNet Network. This redundant media device is suitable for real-time, high-throughput industrial applications. What makes this module different from the 1756-CNB is the presence of an additional ControlNet port that supports redundant media. The module features two ControlNet BNC ports whilst the 1756-CNB only features 1, though both of them possess 1 ControlNet RJ45 port. This Redundant Bridge Module has 5.1 Watts, 5 Megabytes per second (Mbps) and 40 to 48 Logix Communication Connections. Together with the Logix5550 Controller, the 1756-CNBR also regulates the flow of scheduled data and bridges unscheduled data existent between ControlNet and ControlLogix. To avoid the loss of communication when a tap is disconnected, consider using redundant ControlNet media. For that particular connection, the 1756-CNBR is the only suitable module.
Typically, the current from this module is 970 mA at 5.1 Volts DC and 1.7 mA at 24 Volts DC. In addition to that, the 1756-CNBR can support up to 20 buffers meant for unconnected messages. There are also 99 nodes available. Before carrying out any installations, check the label attached to the tap drop cable. This is to ensure that any connections to the tap will not be accidentally reversed. In the event that this is not done, reversals will occur that will require troubleshooting and faulty status conditions to be displayed. It utilizes the Common Industrial Protocol (abbreviated as CIP) to combine an input/output network and a peer-to-peer network functionality, delivering high-performance capabilities for both functions. The 1756-CNBR has a continuous isolation voltage of 30 Volts and it occupies any chassis-based slot. It can be utilized with both standard and redundant power supplies. If users are installing a redundant system, they should position the primary as well as redundant modules in a common slot in their corresponding chassis pair.
