GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-CN2
1756-CN2
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-CN2 1756-CN2//A1756-CN2//B1756-CN2//C
Common misspellings:
- l756-CN2
- 1756CN2
The 1756-CN2, which belongs to the 1756-CN2 series, is a powerful Allen-Bradley communication module that uses the ControlLogix system connections to establish communication links between two or more different devices. Some of the 1756-CN2’s common connections include controller-to-local I/O (also known as local communication module), controller-to-remote I/O (also referred to as remote communication module), controller-to-remote I/O (sometimes referred to as rack-optimized module), and produced as well as consumed tags. This Allen-Bradley ControlLogix ControlNet Module (with a Dual Capacity Bridge) comes with 100 connections and it is used to bridge ControlNet message links to devices connected on other networks, monitors, as well as controls I/O modules.
The 1756-CN2 provides for high-speed I/O bridge-based functionality when it comes to managing distributed I/O modules and transferring of scheduled data through produced or consumed tags. This module can also execute unscheduled MSG instruction communication-related roles with other devices, ControlNet nodes, and messaging data. Ensure that the 1756-CN2 is operated at the recommended industrial setting, i.e. a temperature of between 0 and 60 degrees Celsius. Plus, this module can operate at an altitude of up to 6562 feet without derating. The 1756-CN2 comes with a standard ControlNet bridge and a communication rate of 5 Mbps. The module can support the primary and secondary as well as I/O chassis of a redundancy system. The 1756-CN2 provides for the ControlNet Network and relies on both the CIP plus P2P network for its high-speed performance. The 1756-CN2 is capable of supporting up to 128 connections featuring 99 redistribution points (known as nodes). The 1756-CN2 comes with a rating of 1100 (mA) at 5.1 Volts DC, Volts DC, 3.0 Amps at 24 Volts DC. The module’s operational power and thermal dissipations are 5.6 Watts and 19.1 BTU/hour, respectively.
