GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-BATM
1756-BATM
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-BATM 1756-BATM//A
Common misspellings:
- l756-BATM
- 1756-8ATM
- 1756BATM
The Allen-Bradley 1756-BATM 3.6 Volts Lithium PLC Battery is a replacement lithium battery. The use of the 1756-BATM is mainly limited to industrial computers. The Allen-Bradley 1756-BATM 3.6 Volts Lithium PLC Battery is also used in programmable logic controllers (PLC). The weight of the 1756-BATM is 10g since it is made of only one cell. The average shelf life of the 1756-BATM is about 10 years. The battery with several logic devices, including the Allen-Bradley ControlLogix 5561, 5562, 5563, and 5564 devices and also the 1756-L6x devices. Since the Allen Bradley 1756-BATM 3.6 Volts Lithium PLC Battery is a lithium chemical battery so it a lower self-discharge rate than other cells like the Ni-Cad and NiMH batteries.
A wire lead connector is required for the terminal connection of the 1756-BATM. The power rating that the cell carries is 3.6 Volts. Ideally the battery needs to be placed in an environment where the temperature is within a range of -60 to +85 degrees Celsius. The nominal capacity of the cell is 1.7 Ah. To use the external mounting repeatedly, an adapter cable is required. A DIN rail lock is required if the users want to mount the battery on the panel. The wiring requirement of the Allen-Bradley 1756-BATM 3.6 Volts Lithium PLC Battery is 1-meter Category 3 cables. With no particular enclosure type rating, any type of enclosure can be used. The packaging dimensions of the Allen-Bradley 1756-BATM 3.6 Volts Lithium PLC Battery is 2.65 inches x 1.34 inches x 2.44 inches.
