GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-BA1
1756-BA1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-BA1 1756-BA1//A
Common misspellings:
- l756-BA1
- 1756-8A1
- 1756-BAl
- 1756BA1
The 1756-BA1 is a lithium battery by Allen-Bradley used for the Series A 1756 –L6 controllers. These include the 1756-L55, 1756-L61, 1756-L62, 1756-L63, and also the 1794-L33 controllers. The 1756-BA1 contains manganese dioxide at a concentration range of between 30 and 40%. The 4 lithium metal concentration percentage on the 1756-BA1 is 2.9% while the mixture of solvent of carbonate and ether is 12 to 18%. Basically, the 1756-BA1 is a Sanyo lithium cylindrical SE type of cell battery. The ratings for the 1756-BA1 are 3 Volts DC terminal voltage and 1800 mA on the nominal battery capacity. As indicated above, the 1756-BA1 comes with lithium contents and it uses a lead wire connector terminal. The 1756-BA1 is designed to fit into an open style enclosure. The backplane current is 10 Amps for 5 Volts DC while for the 24 Volts DC the backplane current should be 2.8 Amps.
The operational temperature ranges between -40 and 60 degrees Celsius. The ambient storage temperature is 30 degrees Celsius. Under circumstances where the temperature of a machine operating beneath the 1756-BA1 is 1 degree Celsius above 30 degrees Celsius, consider changing the 1756-BA1 battery within 3 years. Ideally, the higher the surrounding temperature, the sooner the battery should be replaced. The 1756-BA1 weighs 17 grams while the dimensions are 20 × 24 × 8 inches. The 1756-BA1 should be handled with care. When handling the 1756-BA1, avoid crushing it and do not expose the 1756-BA1 to excessive physical shock. The 1756-BA1 positive and negative terminals should not be short-circuited with any conductive metals. A damaged 1756-BA1 should be placed into a suitable container or a sealed plastic bag after cooling. Note that in case of accidental short-circuiting, even for a few seconds, this reduces the 1756-BA1 battery life.
