GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-A17
1756-A17
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-A17 1756-A17//A1756-A17//B1756-A17//C
Common misspellings:
- l756-A17
- 1756-Al7
- 1756A17
The 1756-A17 is a ControlLogix I/O Chassis Based Module manufactured by Allen-Bradley under the ControlLogix Series. The module comes with 17-slot ControlLogix Chassis and has 6.1 Watts of power dissipation. The 1756-A17 has 1.8 Watts power consumption and a maximum backplane current of 1.5 Amps at 1.2 Volts DC, 4 Amps at 3.3 Volts DC, 15 Amps at 5.1 Volts DC, and 2.8 Amps at 24 Volts DC. The 1756-A17 communication system is made of EtherNet/IP networks and also makes use of the ControlNet networks. The 1756-A17 has a standard chassis that includes inherent time stamping capabilities for the some applications. Each of the modules within the chassis receives the power distributed by the chassis backplane. This happens because of the high-speed communication path between the modules.
The 1756-A17 requires a Bulletin 1492 Wiring IFM and it also uses a RTB for connection of all the field side wiring. Therefore, the 1756-A17 chassis is easy to install and maintain. As part of preventive maintenance, electronic keying is deployed that prevents replacement errors. The main feature that makes the 1756-A17 easy to maintain is the RIUP feature. Further, in case the 1756-A17 faces system or field side failure, it has a complete diagnostic feature that is helpful when it comes to identifying the failure. The 1756-A17 is one of the most cost-effective modules and it is easily compatible with the PanelView operator. The operating temperature for the 1756-A17 is -13 to 140 degrees Fahrenheit and the nonoperating temperature or the idle state temperature is -40 to 185 degrees Fahrenheit. The relative humidity is usually 5 to 95% non-condensing. When mounting the 1756-A17 ControlLogix with a standard power supply, it is important to ensure that the spacing requirements are followed.
