GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-OW8I
1769-OW8I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1769 CompactLogix I/O module with the product code 1769-OW8I is designed and manufactured by Allen-Bradley/Rockwell Automation and it is used primarily with ControlLogix controllers. The module has 8 normally open outputs, and it operates on power sources with operating voltage ranges of 5 to 265 Volts AC or 5 to 125 Volts DC.Other Available Revisions for the 1769-OW8I 1769-OW8I//A1769-OW8I//B
Common misspellings:
- l769-OW8I
- 1769-0W8I
- 1769-OWbI
- 1769-OW81
- 1769-OW8l
- 1769OW8I
Technical Specifications for 1769-OW8I
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | CompactLogix |
| Part Number | 1769-OW8I |
| Product Type | Output Module |
| Number of Outputs | 8 normally open |
| Operating Voltage Range | 5 to 265 Volts AC, 5 to 125 Volts DC |
| Current Draw at 5.1 Volts | 125 milliamps |
| Current Draw at 24 Volts | 100 milliamps |
| Maximum Off-State Leakage | 0 milliamps |
| Minimum On-State Current | 10 milliamps at 5 Volts DC |
About 1769-OW8I
The catalog number 1769-OW8I is an order reference for an Allen-Bradley/Rockwell Automation component that can be used for both input and output applications. The 1769-OW8I is part of the 1769 CompactLogix I/O series and it has 8 normally-open outputs. The module is meant to be mounted on a DIN rail or a panel and its dimensions include a height of 118 millimeters (4.65 inches), a width of 35 millimeters (1.38 inches), and a depth of 87 millimeters (3.43 inches). The 1769-OW8I module operates within a voltage range of 5 to 265 Volts for AC operation and a range of 5 to 125 Volts for DC operation. The available outputs are individually isolated into groups of 4 points.The 1769-OW8I module has a current draw of 125 milliamps at 5.1 Volts and a current draw of 100 milliamps at 24 Volts. Additionally, the 1769-OW8I module has a maximum delay of 10 milliseconds whether it is turned on or off. The module dissipates a maximum heat level of 2.83 Watts and it has an isolation voltage of 1836 Volts AC for 1 second and 2596 Volts DC for 2 seconds. In addition to that, the 1769-OW8I module has 0 milliamps of off-state leakage and 10 milliamps at 5 Volts DC of on-state current. The 1769-OW8I module has a maximum current per point of 2.5 Amps and a maximum current per module of 16 Amps. The module requires only a single slot in a chassis for installation. The module has a power supply distance rating of 8 modules and it weighs 290 grams (0.64 pounds).
The 1769-OW8I module is a compact relay contact module designed and manufactured by Allen-Bradley/Rockwell Automation. The module has individually isolated outputs and it is intended for AC/DC operation. The 1769-OW8I module has an open enclosure and it includes certifications from the CE, EAC, RCM, and c-UL-us standards. The module weighs around 290 grams or 0.64 pounds and it has the following dimensions (H x W x D): 118 x 35 x 87 millimeters (4.65 x 1.38 x 3.43 inches). The 1769-OW8I module has 8 open-type output points separated into 2 equal groups of 4 points each. The module features an operating voltage of 5 to 265 Volts for AC operation and a voltage range of 5 to 125 Volts for DC operation.
The 1769-OW8I module has a current rating of 2.5 Amps per point and 16 Amps per module. In addition to that, the module draws a current of 125 milliamps at 5.1 Volts and 100 milliamps at 24 Volts. The on-state current is 10 milliamps at 5 Volts DC and the maximum off-state current leakage is 0 milliamps. The maximum heat dissipation rating of the 1769-OW8I module is 2.83 Watts. The unit has a delay time of 10 milliseconds for both the on and off states. The module has a 0.68 N-m or 6 pounds on an inch of terminal screw torque and 0.46 N-m or 4.1 pounds on an inch of retaining screw torque. It supports DIN rail or panel mounting and it uses a single slot. The unit needs a power supply with a -PA2, -PB2, -PA4, or -PB4 product code and it has an 8-module distance rating. The featured wire size is 22 to 14 AWG for solid wire or 22 to 16 AWG for stranded wire.
F.A.Q for 1769-OW8I
