GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-OV32T
1769-OV32T
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-OV32T 1769-OV32T//A
Common misspellings:
- l769-OV32T
- 1769-0V32T
- 1769OV32T
1769OV32T Allen Bradley I/O MODULE 32PT 24V DC OUT SINK-SINGLE WIDE AB Rockwell Automation
Allen-Bradley designs and manufactures the 1769-OV32T 24 Volts DC Sink Output Module in order to provide a 24 Volts DC sink output module for its 1769 programmable logic controller (PLC) product line. This solid-state module offers 32 terminated outputs, each one independent from the others, with a voltage category of 24 Volts DC sink voltage. This means that the module will provide a low voltage or ground pulse to the load circuit, which will provide a positive voltage connection on its own end. The Allen-Bradley 1769 power source module that can be connected to the Allen-Bradley 1769-OV32T 24 Volts DC Sink Output Module are the 1769-PA2, 1769-PB2, 1769-PA4, and 1769-PB4 modules. All of these power sources operate in a voltage range from 10 to 26.4 Volts DC.
The Allen-Bradley 1769-OV32T 24 Volts DC Sink Output Module is able to withstand a maximum current per point of 0.5 Amps, and a maximum current per module of 4 Amps. The activation of these outputs is fast, with a delay time of lower than 1.5 milliseconds. Given its low weight of 450 grams (0.992 pounds) and small dimensions of 118 x 35 x 87 millimeters (4.65 x 1.38 x 3.43 inches), the Allen-Bradley 1769-OV32T 24 Volts DC Sink Output Module is a very convenient device that can be mounted inside any protected enclosure, directly on a panel, or by using a standard DIN rail. The manufacturer recommends the use of a 1N4004 diode that is wired in parallel to the load for transistor outputs connected to 24 Volts DC rated inductive loads. Detailed information about installation, maintenance, and troubleshooting can be found in the user manual.
