GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-OB16
1769-OB16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-OB16 1769-OB16//A1769-OB16//B
Common misspellings:
- l769-OB16
- 1769-0B16
- 1769-O816
- 1769-OBl6
- 1769OB16
Technical Specifications for 1769-OB16
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | CompactLogix |
| Part Number | 1769-OB16 |
| Product Type | Output Module |
| Voltage Category | 24V DC |
| Operating Voltage Range | 20.4V DC to 26.4V DC |
| Number of Outputs | 16 |
| Bus Current Draw | 200 mA at 5V DC |
| Heat Dissipation | 2.11 Total Watts |
| Surge Current | 2.0 Amps |
About 1769-OB16
The 1769-OB16 module is a solid-state output module that has been manufactured by Allen-Bradley. This module has been designed to be used in an industrial environment and it is recommended to install it by following specific instructions that are intended to extend the life of the module and to guarantee safe operations. These instructions include the prevention of electrostatic discharge and the removal of any power that is being applied to the system before the module is installed. The Allen-Bradley 1769-OB16 solid-state output module can be attached to the controller or module before or after mounting. It is recommended to mount the module on a compatible DIN rail and to leave space between the module and any adjacent equipment. This space needs to be at least 2 inches (50 millimeters) wide for proper air-cooling.
When mounting the Allen-Bradley 1769-OB16 solid-state output module to a panel, it needs to be screwed into place with M4 or #8 panhead screws. This module comes with a height of 118 millimeters, a depth of 87 millimeters, and a width of 35 millimeters, and it also comes with an approximate shipping weight of 280 grams. The Allen-Bradley 1769-OB16 solid-state output module has a voltage category of 24 Volts DC and 16 outputs. The module has a heat dissipation rating of 2.11 Watts. Some of the operating conditions that this module needs are an operating temperature range of 0 to 60 degrees Celsius and a relative humidity range of 5 to 95 percent without condensation. It is important to maintain these conditions so the module can operate optimally. The module also supports shocks of up to 30 g.
The 1769-OB16 output module is a 16-point I/O module manufactured by Allen-Bradley. It is a solid-state device and it has a voltage rating of 24 Volts DC. The module is equipped with a removable terminal block and with a finger-safe cover. The terminal block is used for connecting actuators and other sensor devices. This module is mostly used when an application needs more than one I/O module or more I/O than are available as the built-in I/O of the controller. The 1769-OB16 output module is fully compatible with Allen-Bradley Micrologix 1500 controllers. The Micrologix family of controllers offers devices with different levels of control. These controllers are compact in size and small enough to fit in small spaces. The Micrologix 1500 controller is a platform for logic control with a small footprint. It comes with a larger memory than other controllers to handle a variety of applications. It has high performance expansion options. For connection, it uses a 22-14 AWG cable.
The outputs of the Allen-Bradley 1769-OB16 output module are single-ended. It offers high current outputs. There are LED indicators present on the front of the module. The I/O module is certified with the ANSI and ESD ratings. It meets a variety of industrial and environmental ratings. The module is widely used in the automobile, robotics and manufacturing industries. The 1769-OB16 output module comes with an output delay of 0.1 milliseconds for the on-state and 1 milliseconds for the off-state. The module dissipates a total of 2.11 Watts of energy as heat. The I/O module can be mounted using a DIN rail.
F.A.Q for 1769-OB16
