GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-OA8
1769-OA8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-OA8 1769-OA8//A1769-OA8//B
Common misspellings:
- l769-OA8
- 1769-0A8
- 1769-OAb
- 1769OA8
1769OA8 Allen Bradley OUTPUT MODULE 8POINT 120/240VAC AB Rockwell Automation
The 1769-OA8 output module is an Allen-Bradley compact I/O module. It is part of the Allen-Bradley 1769 series. This output module can handle voltage loads of 120 and 240 Volts AC. This CompactLogix module has 8 outputs and the outputs are divided into 2 groups of 4. The operating voltage range is between 85 Volts and 265 Volts AC. The on-state current of the module is 10 milliamps at a minimum. The signal delay of the turn-on and turn-off cycle is a ½ cycle each. The bus current draw of the module is 225 milliamps with 5 Volts DC line voltage with a power rating of 1.125 Watts. The 1769-OA8 output module dissipates a total of 4.9 Watts of energy in the form of heat when all the output points are powered on. The I/O module can be mounted using a DIN rail. The module weighs 2 pounds. The I/O module has an open enclosure and it should be used in an indoor location only.
The 1769-OA8 output module is designed with a terminal block that can be easily accessed to connect to the I/O sensors and the actuator units in a system. The temperature for normal operation ranges between 0 and 60 degrees Celsius. While not in use, it can be stored at a temperature between -40 and 85 degrees Celsius. The 1769-OA8 output module has been certified with the c-UL, CE, and C-Tick standards.
