GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-L33ERMOS
1769-L33ERMOS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-L33ERMOS 1769-L33ERMOS//A
Common misspellings:
- l769-L33ERMOS
- 1769-133ERMOS
- 1769-L33ERM0S
- 1769L33ERMOS
Technical Specifications for 1769-L33ERMOS
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | CompactLogix |
| Product Type: | Armor Compact GuardLogix Controller |
| Part Number: | 1769-L33ERMOS |
| Controller Memory: | 2 MB (Volatile / standard); 1MB (safety); 1GB (Non-volatile) |
| Integrated Motion: | Yes |
| No. of Axes: | Eight (8) |
| Communication ports: | Two (2) Ethernet; One (1) USB Port |
| Supported Protocols: | Ethernet |
| No. of nodes: | Up to 32 nodes |
| Integrated Motion: | Up to Eight (8) axes |
| No. of Task: | 32 Task |
| Programs per task | 1000 per task |
| Programming Language: | Relay ladder, Structured Text, Function block, SFC |
| Programming software: | Studio 5000 |
| Mounting: | DIN Rail |
About 1769-L33ERMOS
The Allen-Bradley controller with catalog number 1769-L33ERMOS is an Armor CompactLogix controller. This controller is especially designed for machine builders supporting Allen-Bradley On-Machine I/O technology. The 1769-L33ERMOS is designed with an enclosure Rated for Ingress Protection (IP67) and UL Type 4X applications and environments. This controller does not require installation however, may still use of an enclosure to allow a stand-alone installation. The integrated module enclosure is already capable of protecting the controller itself. It allows installation near the machine or to the machine itself if permitted by the process. When mounting the controller, minimum spacing requirements is 30 mm or 1.18 inches on all sides of the controller. Mounting feet can be attached in either horizontal or vertical orientation. Attache the mounting feet to the controllers body through the Four (4) flat head screw included with the controller. The controller can be mounted directly to a machine with the use of the Four (4) mounting holes that is also provided with the controller. The 1769-L33ERMOS also has an access door to allow access to the controllers Controller mode toggle switch, Controller memory card socket, Controller USB port, Controller reset button and Power supply fuse circuitry. The controller is shipped in Remote Program mode. The enclosure access door may be removed by loosening the Four (4) captive screws in the front of the enclosure. Lift the door and rotate from the pivot at the lower left of the corner. The door does not detach to the controller. The 1769-L33ERMOS is provided with a dual Ethernet communication port that support 10/100 Mbps. The dual Ethernet interface supports Device Level Ring (DLR), Star and Linear topology. DLR is a fault tolerant system used in higher critical applications while Star and Linear topologies are simplex communication topology with single communication path. This topology is used in less critical applications. When wiring the M12 D-Code patchcords, termination assignments are Pin 1 M12_Tx+ ,Pin 2 M12_Rx+, Pin 3 M12_Tx, Pin 4 M12_Rx, Pin 5 Connector Shell Shield GND. The 1769-L33ERMOS functions similarly to a Standard CompactLogix controller. It is capable of executing 32 tasks with 100 programs per task. It allows up to 256 controller connections and maximum of 32 sockets. It has a built-in 2MB standard user memory, 1 MB safety memory and 1GB non-volatile memory via the removable 1769-SD1 memory card. The controller is also capable of motion controller and supports up to Eight (8) motion control axes. The controllers integrated safety capability allows the unit to be used in application that require SIL 3 or Performance Level (e) application where de-energized state is the considered safe-state.F.A.Q for 1769-L33ERMOS
| Q: 1. What is the difference between the 1769-L33ERMO and 1769-L33ERMOS? | A: The main difference between the 2 controllers is that the 1769-L33ERMOS is an Armor Compact GuardLogix controller with integrated safety function while the other is technically a standard controller. |
|---|---|
| Q: 2. What are the memory type and size available with the 1769-L33ERMOS? | A: The 1769-L33ERMOS controller has 2MB standard memory, 1MB safety memory and 1GB non-volatile memory 1784-SD1 memory card. |
| Q: 3. Does the 1769-L33ERMOS support implementation of Remote I/O? | A: Yes, the controller may look differently but it supports standard CompactLogix controller functions. |
PDFsupply Tech
The 1769-L33ERMOS is an Armor Compact GuardLogix controller. This controller combines a variety of industrial features such as standard controller capability, Integrated motion capability and integrated safety function. Compared to the 1769-L33ERMO which is not a safety controller, the 1769-L33ERMOS is provided with safety dedicated memory amounting to 1 MB. This controller also features standard controller capability with the addition of support to On-Machine I/O module blocks.
