GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-IR6
1769-IR6
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-IR6 1769-IR6//A
Common misspellings:
- l769-IR6
- 1769-1R6
- 1769-lR6
- 1769IR6
1769IR6 Allen Bradley INPUT MODULE 6POINT RTD/RESISTANCE AB Rockwell Automation
The Allen-Bradley 1769-IR6 input module is a compact RTD/resistance input module. There are 6 RTD inputs on this module. The input range can be configured for 0 to 150 Ohms, 0 to 500 Ohms, 0 to 1000 Ohms, and 0 to 3000 Ohms. The input resolution is dependent on the input filter and on the module configuration. The current draw of the 1769-IR6 input module is 1000 milliamps at 5.1 Volts DC and 35 milliamps at 24 Volts DC. The heat dissipated by the 1769-IR6 input module can go up to 1.5 Watts. The converter type is sigma delta conversion. The common mode voltage range is +/-10 Volts DC. The maximum cable impedance supported by the module is 25 Ohms. The input impedance is greater than 10 Megaohms.
RTDs which can be used with the 1769-IR6 input module include the Pt 385, Pt 3916, Cu 426, Ci 618, Ni 674, and Ni-Fe 518 RTDs. The accuracy of the 1769-IR6 input module varies with the operating temperature and the type of RTD. At 25 degrees Celsius with a 50 to 60 Hertz filter, the accuracy is +/-0.5 degrees Celsius for the Pt 385 RTD, +/-0.3 degrees Celsius for the Ni RTD, and +/-0.8 degrees Celsius for the Cu RTD. At 60 degrees Celsius with a 50 to 60 Hertz filter, the accuracy is +/-0.9 degrees Celsius for the Pt 385 RTD, +/-0.5 degrees Celsius for the Ni RTD, and +/- 1.1 degrees Celsius for the Cu RTD. The rated nonlinearity for the 1769-IR6 module is +/-0.05%. The open circuit detection time is 6 milliseconds to 303 seconds. The 1769-IR6 input module weighs 276 grams. The dimensions of the 1769-IR6 input module are 4.65 x 1.38 x 3.43 inches.
