GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-IQ32T
1769-IQ32T
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1769-IQ32T 1769-IQ32T//A
Common misspellings:
- l769-IQ32T
- 1769-1Q32T
- 1769-lQ32T
- 1769IQ32T
1769IQ32T Allen Bradley 32 POINT HIGH DENSITY, 24V DC INPUT - SINGLE WIDE AB Rockwell Automation
The Allen-Bradley 1769-IQ32T input module is a compact 32-point 24 Volts DC rated sink/source terminated input module. The 1769-IQ32T input module is ESD-sensitive and Allen-Bradley recommends the following precautions when handling the module: the use of a grounded wrist-strap, avoiding touching the bus connector or connector pins, and working in a static-safe area if possible. Any unused 1769-IQ32T input module should be stored in a static-safe container. The power should be removed before the module is installed. The 1769-IQ32T input module can be connected to an adjacent I/O or to a controller before or after it is mounted. Bus connectors should be securely locked together during module attachment to ensure proper electrical connection. A minimum spacing of 2 inches should be provided all around the module for proper ventilation. The miswiring of the 1769-IQ32T input module to an AC power source will lead to module damage.
The dimensions of the 1769-IQ32T input module are 118 x 85 x 35 millimeters. The approximate shipping weight is 230 grams. The storage temperature range is -40 to 185 degrees Fahrenheit and the operating temperature is 32 to 140 degrees Fahrenheit. The maximum recommended operating altitude is 2000 meters. The operating voltage range for the 1769-IQ32T input module is 20.4 to 26.4 Volts DC at 140 degrees Fahrenheit. There are 32 inputs on the 1769-IQ32T module. The bus current draw is 170 milliamps at 5 Volts DC. The module power consumption is 0.85 Watts and the heat dissipation is 4.77 Watts. The peak inrush current is 5 milliamps. The nominal input impedance is 5.6 kiloohms. The maximum values for the off-state voltage and off-state current are 11 Volts DC and 1.7 milliamps, respectively. The minimum values for on-state voltage and on-state current are 19 Volts DC and 3.0 milliamps, respectively.
