GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1769-IF4
1769-IF4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The CompactLogix 1769-IF4 analog input module is part of the 1769 product line by Allen-Bradley/Rockwell Automation and it has the following dimensions: 118 millimeters (4.6 inches) x 87 millimeters (3.4 inches) x 35 millimeters (1.3 inches). The module has a weight of 300 grams and it has 4 differential or single-ended inputs.Other Available Revisions for the 1769-IF4 1769-IF4//A1769-IF4//B
Common misspellings:
- l769-IF4
- 1769-1F4
- 1769-lF4
- 1769-IFA
- 1769IF4
Technical Specifications for 1769-IF4
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | CompactLogix |
| Part Number | 1769-IF4 |
| Product Type | Input Module |
| Maximum current draw at 5 Volts DC | 120 milliamps |
| Maximum current draw at 24 Volts DC | 60 milliamps |
| Analog normal operating voltage range | +/-10 Volts DC, 0 to 10 Volts DC, 0 to Volts DC, 1 to 5 Volts DC |
| Analog normal operating current range | 0 to 20 milliamps, 4 to 20 milliamps |
| Number of inputs | Differential or single-ended inputs |
| Heat dissipation | 2.63 Watts |
About 1769-IF4
The product code 1769-IF4 is used for an industrial component manufactured by Allen-Bradley/Rockwell Automation. The 1769-IF4 module is a CompactLogix analog input module that operates in normal voltage ranges of +/-10 Volts DC, 0 to 10 Volts DC, 0 to 5 Volts DC, or 1 to 5 Volts DC. The operating current range is 0 to 20 milliamps or 4 to 20 milliamps. The 1769-IF4 input module has 4 differential or single-ended inputs and it dissipates 2.63 Watts of heat. The 1769-IF4 analog input module has a maximum resolution of 14 bits for both the unipolar and bipolar modes. The unit has a common mode voltage range of +/- Volts maximum per channel and common mode rejection of greater than 60 decibels at an operating frequency of 50 to 60 Hertz.The input impedance of the 1769-IF4 input module is 220 kiloohms at the voltage terminal and 250 Ohms at the current terminal. The 1769-IF4 input module can be calibrated automatically when channels are enabled and during the change of configuration between channels. The module features a non-linearity rating of +/- 0.03% and a repeatability rating of +/- 0.03%. The module provides channel diagnostics and it is equipped with LED indicators for status updates. The maximum current draw of the unit is 120 milliamps at 5 Volts DC and 60 milliamps at 24 Volts DC. The dimensions of the device are a height of 118 millimeters (4.6 inches), a depth of 87 millimeters (3.4 inches), and a width of 35 millimeters (1.3 inches).
The Allen-Bradley 1769-IF4 module is a compact voltage and current analog input module. The 1769-IF4 module belongs to the 1769 compact I/O modules series and it can be used with 1769 CompactLogix series controllers in assemblies with 1769-ADN and 1769-AENTR adapters and for an expansion I/O device in a MicroLogix 1500 controller assembly. The 1769-IF4 module can be installed on a DIN rail or on a panel with mounting screws. When not connected to a MicroLogix 1500 base, this 1769 I/O module requires an external power supply. The 1769-IF4 module supports 4 differential or single-ended inputs. The supported input ranges include +/-10 Volts, 0 to 10 Volts, 0 to 5 Volts, 1 to 5 Volts, 0 to 20 milliamps, and 4 to 20 milliamps.
The 1769-IF4 I/O module draws 120 milliamps of current at 5 Volts DC and 60 milliamps of current at 24 Volts DC. The maximum rated heat dissipation is 2.52 Watts. The resolution is 14 bits (unipolar) and 14 bits plus sign (bipolar). The rated working voltage is 30 Volts AC or 30 Volts DC. The maximum common mode voltage range is +/-10 Volts DC per channel. The input impedance for voltage inputs is 220 kiloohms and for current inputs, it is 250 ohms. The weight and dimensions of the 1769-IF4 module are 300 grams and 118 x 35 x 87 millimeters, respectively. The module requires 1 slot for installation. Power supplies which can be used to supply external power to the module include the 1769-PA2, 1769-PB2, 1769-PA4, and 1769-PB4 power supplies. The power supply voltage range is 20.4 to 26.4 Volts DC. The recommended wire type is copper wire which is rated for 90 degrees Celsius. The 1769-IF4 module comes in an open enclosure.
F.A.Q for 1769-IF4
