GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » CompactLogix » You are here: 1768-M04SE
1768-M04SE
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1768-M04SE is a SERCOS Interface module. This interface module is used for motion control applications wherein up to Four (4) drives may be controlled. It can consume a maximum of Three (3) connections.Other Available Revisions for the 1768-M04SE 1768-M04SE//A
Common misspellings:
- l768-M04SE
- 176b-M04SE
- 1768-Mo4SE
- 1768-M0ASE
- 1768M04SE
Technical Specifications for 1768-M04SE
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | CompactLogix |
| Product Type: | SERCOS Interface Module |
| Part Number: | 1768-M04SE |
| Supported No. of Drives: | Up to Four (4) drives |
| Allen-Bradley Drives compatibility: | Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives. |
| Connections consumed: | Three (3) |
| SERCOS Class | Class B (Position or Velocity) |
| SERCOS Data Rate | 4 M or 8 M |
| SERCOS Operating Cycle | 4 M Data Rate and up to 2 drives 0.5 ms Cycle Time; 4M Data Rate and up to 4 drives 1 ms Cycle Time; 8 M Data Rate and up to 4 drives 0.5 ms Cycle Time |
| Fiber Optic Connector | F-SMA standard screw-type connector |
| Fiber Optic Core Diameter | Plastic cable 980 m 60 m; Glass cable 200 m 4 m |
| Fiber Optic Operating Temperature | Plastic cable -5585 C; Glass cable -2085 C |
| Fiber Optic Bend Radius | Plastic cable without a jacket 25 mm (0.98 in.); Plastic cable with a standard jacket 25 mm (0.98 in.); Plastic cable with a nylon jacket 40 mm (1.6 in.); Glass cable 30 mm (1.2 in.) |
About 1768-M04SE
The 1768-M04SE is an Allen-Bradley manufactured Programmable Logic Controller (PLC) module used for motion applications. This module is a single slot module that functions as a Serial Realtime Communication System (SERCOS) interface module that belongs to the 1768 CompactLogix product family. The 1768-M04SE is categorized as a specialty module that is directly mounted to the 1768 supported slot as a local module. It may be installed along a 1768-L43 controller which supports up to Two (2) local modules and 1768-L45 which supports up to Four (4) local modules. This controller is compatible with SERCOS capable drives such as Allen-Bradley Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives. SERCOS (Serial Real-time Communications System) is an internationally recognized and approved communication protocol intended for motion control based on International Electro-technical Commission (IEC) standard IEC-61491. It is primarily designed for high-speed and real-time serial communication of standardized closed-loop data, using fiber-optic cable that are resistant to electrical noises. The 1768-M04SE SERCOS interface module is primarily used to for motion control applications specifically, control up to Four (4) drives. It supports a maximum of Three (3) consumed connections. The SERCOS interface module utilizes Fiber optic technology for faster data transmission and noise susceptibility. When installing Fiber Optic cable, the accepted bending radii are 25 mm or 0.98 inches for Plastic cable without a jacket; 25 mm or 0.98 inches for Plastic cable with a standard jacket; 40 mm or 1.6 inches for Plastic cable with a nylon jacket and 30 mm or 1.2 inches for Glass cable. Fiber Optic Cable Attenuation are 140 dB/km @ 650 nm for Plastic Cable and 6.0 dB/km @ 820 nm for Glass cable. Accepted Fiber Optic cable cladding diameter are 1000 m 60 m for Plastic cable and 230 m +0/-10 m for Glass cable. Required Fiber Optic connector for connecting to drive interfaces is an F-SMA standard screw-type connector with core diameter of 980 m 60 m for Plastic cable and 200 m 4 m for Glass cable. Fiber Optic transmission range is 1-32 m for plastic cable and 1-200 m for Glass cable. Fiber Optic operating temperature requirement is -5585 C for Plastic cable and -2085 C for Glass cable. The 1768-M04SE SERCOS interface module supports SERCOS Class B which is used for Position or Velocity with SERCOS data rate of 4 M or 8 M. Supported SERCOS operating cycle are 0.5 ms cycle time for 4 M Data Rate and up to 2 drives for Kinetix 6000 drives only; 1 ms Cycle Time for 4 M Data Rate and up to 4 drives and 0.5 ms Cycle Time for 8 M Data Rate and up to 4 drives.F.A.Q for 1768-M04SE
| Q: 1. How many drives does the 1768-M04SE is capable of controlling? | A: The 1768-M04SE supports up to Four (4) drives. |
|---|---|
| Q: 2. What Allen-Bradley drives is the 1768-M04SE compatible with? | A: The interface module is compatible with Allen-Bradley Kinetix 2000, Kinetix 6000, Kinetix 7000, and Ultra 3000 SERCOS servo drives. |
| Q: 3. What is the cable requirement of 1768-M04SE? | A: The 1768-M04SE uses Fiber Optic Cable. |
PDFsupply Tech
The 1768-M04SE is a SERCOS interface module used to control Allen-Bradley drives. This module is capable of controlling up to Four (4) drives. It is exclusively used for 1768 CompactLogix. Other module versions can control up to Eight (8) drives however, designed for ControlLogix product family only.
