GE / IP FANUC Series 90/30 In Stock
Allen Bradley | Point I/O
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
The Allen-Bradley 1734 POINT I/O system are Allen-Bradley Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) compatible components used for implementing simple I/O expansion to cost-effective distributed I/O system.
1734 POINT I/O modules are low densi...
The Allen-Bradley 1734 POINT I/O system are Allen-Bradley Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) compatible components used for implementing simple I/O expansion to cost-effective distributed I/O system.
1734 POINT I/O modules are low density modules, available in Discrete Input, Discrete Output, Analog Input, Analog Output, POINT Guard and Communication and Specialty modules. POINT I/O modules are designed for independent selection of I/O and network interface. It has also a variety of termination options, providing a more fast and secure connection method.
Point I/O systems are highly modular with a small and compact assembly. This system is ideally used for cost effectiveness as the modularity allows replacement of a portion of the module assembly and are highly scalable which means, modules may be added in the future with minimum disturbance. POINT I/O modules supports DIN rail installation and capable of fitting in tight and minimal installation space.
Standard Discrete Input and output modules supports a wide variety of voltages such as DC, AC and TTL ranges, with module level diagnostics such as short-circuit and open loop detection. Analog modules support up to eight single-ended input and output modules with specific modules compatible for Resistance Temperature Detector (RTD), Thermocouple, resistance and millivolt inputs. Each channel of the analog module are provided with software adjustable input filters to improve the module’s performance especially with erratic or fast changing process variables.
Specialty modules supported by the POINT I/O system include Counter and encoder and absolute module for use in High-speed counting, motion and position control typically used in the manufacturing industry, Synchronous Serial Interface for device level communication, Address Reserve Module (ARM) for securing a specific slot for future use and to save configuration, and Channel IO Link Master modules for communication with IO-Link enabled devices.
Communication modules supported by the POINT I/O system includes ControlNet, DeviceNet, Ethernet I/P and Profibus communication module. Ethernet communication adapters include 1734-AENT for linear Ethernet topology, 1734-AENTR for Redundant Ethernet communication; ControlNet communication module with catalog number 1734-ACNR with support for redundant ControlNet; DeviceNet communication modules such as 1734-AND, 1734-ADN(X), and 1734-PDN; and 1734-APB for ProfiBus communication.
Each communication adapter supports a maximum of 13 - 17 I/O modules or 10A field power limit. I/O modules are powered through the backplane. With an external power supply applied to a POINT I/O assembly, up to 63 modules or 504 channels may be assembled.
A complete and functional POINT I/O node is made of Four (4) components. These components include the I/O module itself, which holds the system interface and filed interface circuitries, Communication adapter or interfaces to allow communication to master / server devices, Power distribution modules used to provide system power to enable expandability and allow mixing of signal types and Terminal bases that provides wiring and field interface terminals to establish connection to field devices and instruments as well as power supplies and communication cables.
Point I/O systems are compatible for use with CompactLogix and ControlLogix and configured using RSLogix 5000 or Studio 5000 Logix designer
Read More >
| 1734-IE2C | The Allen-Bradley 1734-IE2C is a POINT I/O analog input module. This module has Two (2) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. | Buy Now |
| 1734-IE2V | The Allen-Bradley 1734-IE2V is a POINT I/O analog input module. This module has Two (2) single-ended input, non-isolated current input channels. It is compatible with user-configurable input signals of 0-10VDC, (-0.0V under, +0.5V over) and ±10V, (-0.5V under, +0.5V over). | Buy Now |
| 1734-IE4C | The Allen-Bradley 1734-IE4C is a POINT I/O analog input module. This module has Four (4) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. | Buy Now |
| 1734-IE8C | The Allen-Bradley 1734-IE8C is a POINT I/O analog input module. This module has Eight (8) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. | Buy Now |
| 1734-IR2 | The 1734-IR2 is a POINT I/O RTD Input module. This module has Two (2) RTD channels compatible for 2-Wire and 3-Wire RTD sensor. This module is compatible with a variety of RTDs such as 100 Pt _ = 0.00385 Euro -328...1598 ¡F (-200...+870 ¡C), 200 Pt _ = 0.00385 Euro -328...1166 ¡F (-200...+630 ¡C), 100 Pt _ = 0.003916 U.S. -328...1166 ¡F (-200...+630 ¡C), 200 Pt _ = 0.003916 U.S. -328...1166 ¡F (-200...+630 ¡C), 10 Cu _ = 0.00427 -328...500 ¡F (-200...+260 ¡C), 100 Ni _ = 0.00618 -76...+482 ¡F (-60...+250 ¡C), 120 Ni _ = 0.00618 -76...+482 ¡F (-60...+250 ¡C) and 120 Ni _ = 0.00672 -76...+482 ¡F (-60...+250 ¡C). | Buy Now |
| 1734-IR2E | The 1734-IR2E is a POINT I/O RTD Input module. This module has Two (2) RTD channels compatible for 2-Wire and 3-Wire RTD sensor. This module is compatible with a specific RTD sensor such as 100 ½ Pt, _ = 0.00385 Euro -50É320 ¡C (-58É608 ¡F). | Buy Now |
| 1734-IT2I | The 1734-IT2I is a POINT I/O Thermocouple Input module. This module has Two (2)differential and isolated millivolt inputs, compatible with Thermocouple types such as B, C, E, J, K, R, N, S and T and millivolt signal with range of -70 mV - +70 mV. | Buy Now |
| 1734-OE2C | The Allen-Bradley 1734-OE2C is a POINT I/O analog output module. This module has Two (2) single-ended, non-isolated current output channels. The module has 0 mA output until communication established and configurable for 4-20 mA or 0-20mA outputs. | Buy Now |
| 1734-OE2V | The Allen-Bradley 1734-OE2V is a POINT I/O analog output module. This module has Two (2) single-ended, non-isolated voltage output channels. The module has 0V output until communication established and configurable for 0-10V, and +/- 10V. | Buy Now |
| 1734-OE4C | The Allen-Bradley 1734-OE4C is a POINT I/O analog output module. This module has Four (4) single-ended, non-isolated current output channels. The module has 0 mA output until communication established and configurable for 4-20 mA or 0-20mA outputs. | Buy Now |
| 1734sc-IE2CH | The Allen-Bradley 1734sc-IE2CH is an encompass partner module manufactured by Spectrum controls. This module has Two (2) single-ended 4-20mA input plus HART protocol. It is compatible the POINT I/O system. | Buy Now |
| 1734sc-IE4CH | The Allen-Bradley 1734sc-IE4CH is an encompass partner module manufactured by Spectrum controls. This module has Four (4) single-ended 4-20mA input plus HART protocol. It is compatible the POINT I/O system. | Buy Now |
| 1734sc-IF4U | The Allen-Bradley 1734sc-IF4U is an encompass partner module manufactured by Spectrum controls. This module is a universal input module that is compatible with Thermocouple sensors J, K, T, E; RTD sensors such as PT385/3916, Ni618/672, NiFe518, Cu426; Resistance 0-150, 0-1000, 0-3000 ohms; Current signals 0-20 mA, 4-20 mA and Voltage signals ±50 mV, ±100 mV, 0-5 V, 1-5 V, 0-10 V, ±10 V. This module is compatible for use with POINT I/O modules. | Buy Now |
| 1734sc-OE2CIH | The Allen-Bradley 1734sc-OE2CIH is an encompass partner module manufactured by Spectrum controls. This module has Two (2) isolated output channels with output ranges of 0-20 mA; 4-20 mA plus HART. It is compatible with Allen-BradleyÕs POINT I/O system. | Buy Now |
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.