GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: ILX34-MBS485
ILX34-MBS485
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the ILX34-MBS485 ILX34-MBS485//A
Common misspellings:
- 1LX34-MBS485
- lLX34-MBS485
- I1X34-MBS485
- ILX3A-MBS485
- ILX34-M8S485
- ILX34-MBSA85
- ILX34-MBS4b5
- ILX34MBS485
Technical Specifications for ILX34-MBS485
| Manufacturer | Spectrum Controls |
|---|---|
| Part Number | ILX34-MBS485 |
| Product Family | POINT I/O |
| Module Type | Communication Module |
| No. of Channels | 1 |
| Compatible Terminal Base Units: | 1734-TB or -TBS wiring base assembly (not included) 1734-TOP or -TOPS |
| Communication Standard: | RS422 / RS485 |
| Supported Protocol: | MODBUS RTU; ASCII Mode |
| Transmission speed: | 110 to 38.4K baud |
| Node Address | 1 - 247 |
| Indicators: | 1 green/red module status indicator, logic side 1 green/red network status indicator, logic side 2 greed TXD, RXD status indicators |
| Supported Modbus Function Codes: | 1: Read Coil Status, 2: Read Input Status, 3: Read Holding Registers, 4: Read Input Registers, 5: Force (Write) Single Coil, 6: Preset (Write) Single Holding Register, 8: Diagnostics (Slave Only, Responds to Sub function 00), 15: Force( |
| Pointbus Current | 75 mA @ 5 VDC |
| Operating Temperature: | -20 to 55C (-4 to 131F) |
| Operating Vibration: | 5g @ 10-500Hz |
| Operating Shock: | 30g peak acceleration |
| Dimensions: | 2.21H x 0.47W x 2.97L (56H x 12W x 75.5L) |
About ILX34-MBS485
The ILX34-MBS485 is a MODBUS is a Serial Communication Interface that is made by an encompass partner company, Prosoft Technology for Allen-Bradley. This module is directly mounted to POINT I/O terminal and may be used along any other POINT I/O module. It may also be used with CompactLogix L1 controllers. The ILX34-MBS485 is a single slot module, with One (1) communication port that supports RS422 and RS485 communication standard. This communication interface has configurable parameters such as Baud rate ranging from 110 to 38.4K baud, Stop Bits with selection of 0 and 1, Data size with selection of 7 or 8 bits, and Parity with selection of None, Even and Odd. The communication port may be operated in MODBUS RTU mode or ASCII mode. The ILX34-MBS485 supports MODBUS function codes including 1: Read Coil Status, 2: Read Input Status, 3: Read Holding Registers, 4: Read Input Registers, 5: Force (Write) Single Coil, 6: Preset (Write) Single Holding Register, 8: Diagnostics (Slave Only, Responds to Sub function 00), 15: Force( Write) Multiple Coils, and 16: Preset (Write) Multiple Holding Registers. If configured in MOSBUS RTU mode, the communication interface is ideal for use in Power systems integration wherein Power meters and other Intelligent Electronic Devices may be connected in daisy chain configuration, allowing simultaneous data exchange. It may also be used as direct interface to Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS), gateways, OPC servers and other electronic and applications. The same interface supports ASCII communication wherein the module can be configured to receive barcodes from a connected scanner for extracting information kept within. This application is typically found in manufacturing, packaging and processing industries wherein processes are typically in batches. The ASCII decodes the barcode data and which is then configured in the PLC to segregate products accordingly. Up to 1000 words of data and up to 30 commands wherein 36 words per command is supported by this module. The serial port of the ILX34-MBS485 is configurable as MODBUS master or slave and may also be controlled by enabling or disabling through the user program. The POINTBus current draw of the module is 75 mA @ 5 VDC with serial line voltage of -15 to +15 VDC. The moduleÕs operating temperature requirement is -4¡F to 131¡F or -20¡C to 55¡C with relative humidity of 5% to 95% RH with no condensation. Operating shock and vibration of the module is 30g Peak acceleration and Tested 5g @ 10 to 500 Hz respectively. If module will act as a spare unit, store the module in a location with temperature of -40¡F to 185¡F or -40¡C to 85¡C. The built-in status indicators provide local monitoring of the moduleÕs operation state particularly module status via the single green/red LED; network status via the single green/red network status indicator and status indicators via the Two (2) green TXD, RXD labeled LED indicators.F.A.Q for ILX34-MBS485
| Q: 1. What is the the difference between ILX34-MBS485 and ILX34-MBS232? | A: The main difference between the Two device is the communication standard support. The ILX34-MBS232 supports point to point connection while the ILX34-MBS485 supports multi-partner communication. |
|---|---|
| Q: 2. Aside from SCADA and similar applications, what other applications is ILX34-MBS485 advantageous? | A: Power Metering systems. Power Meters may be connected in daisy chain configuration to allow access to the electrical parameters. In much larger systems, this module may also be used in substation automation. |
| Q: 3. What is the communication rate supported by the ILX34-MBS485? | A: The ILX34-MBS485 supports 110 to 38.4K baud. |
PDFsupply Tech
The ILX34-MBS485 is a serial interface module manufactured by Prosoft Technology for Allen-Bradley. This module has an RS422 / RS485 communication interface allowing communication via MODBUS or ASCII mode. RS422 / RS485 supports multi-node communication wherein up to 32 devices may be connected compared to the ILX34-MBS232 which can only accommodate One (1) connection at a time.
