1734D-IB8XOW8S

Technical Specifications for 1734D-IB8XOW8S

Manufacturer:	Rockwell Automation
Brand:	Allen-Bradley
Product Family:	1734D POINTBlock I/O
Product Type:	Accessory
Part Number:	1734D-IB8XOW8S
Module Type	Combination I/O Module
No. of Channels	Eight (8) 24VDC Input; Eight (8) Relay Output
Input Voltage, nominal	24VDC
Input Voltage Range	10-28.8VDC
Output Type	Form A, normally open (N.O.) Single Pole, Single Throw (SPST)
Output Voltage Range	5-30V dc @ 2.0A resistive 48V dc @ 0.5A resistive 125V dc @ 0.25A resistive 125V ac @ 2.0A resistive 240V ac @ 2.0A resistive
Supported Communication Protocol	DeviceNet
Number of POINT I/O Expansion Modules	12 maximum added at expansion port
Wire Size	14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max
Connection Type	Spring clamp
Enclosure type rating	None (open-style)
Operating Temperature:	-20É55 ¡C (-4É131 ¡F)
Surrounding Air Temperature	55 ¡C (131 ¡F)
Relative Humidity	5É95% noncondensing

About 1734D-IB8XOW8S

The 1734D-IB8XOW8S belongs to the POINTBlock I/O system that features integrated I/O channels and DeviceNet communication interface. Specifically, the 1734D-IB8XOW8S has Eight (8) 24VDC input channels and Eight (8) Relay Output channels. This POINTBlock module has POINBus expansion port which allow installation of up to Twelve (12) POINT I/O modules. POINTBlock I/O system are designed for implementing Distributed I/O solution. POINTBlock modules are installed with DeviceNet interface as standard communication method to DeviceNet enabled controllers as well as DeviceNet scanners. It supports communication speed of 125K, 250K or 500K bits/second and compliant to Open DeviceNet Vendors Association (ODVA) standard. The POINBlock module also supports auto-baud rate configuration for detection of communication settings automatically without the need manually configuring the communication parameters. The input channels of this module are designed for voltage range of 85-132 VAC along a frequency of 7-63 Hz with minimum ON state voltage of 10.0VDC and maximum ON state voltage of 28.8VDC. The modules minimum ON state current is 2.5 mA, maximum On-state Current of 7.6 mA and nominal ON state current of 6.3 mA @ 24VDC. Each channel has selectable input delay time of 0-.65 ms plus a fixed delay time of 0.5ms. The output channels are compatible for a variety of output voltage ranges such as 5-30V dc at 2.0A resistive load; 48V dc at 0.5A resistive load; 125V dc at 0.25A resistive load; 125V ac at 2.0A resistive load and 240V ac at 2.0A resistive load. When operated at rated power, the output channels provide an output channel depending on the operating voltage. Specifically, rated power varieties include 2A @ 5-30V dc; 0.5A @ 48Vdc; 0.25A @ 125V dc; 2A @ 125V ac and 2A @ 240V ac for resistive loads and 2.0A steady state @ 5-30V dc, L/R - 7ms; 0.5A steady state @ 48V dc, L/R = 7ms; 0.25A steady state @ 125V dc, L/R = 7ms; 2.0A steady state, 15A make @ 125V ac;PF = cos _ = 0.4 and 2.0A steady state, 15A make @ 240V ac, PF = cos _ = 0.4 for Inductive loads. The 1734D-IB8XOW8S has spring clamp terminal. It allows faster signal wiring and requires lesser accessory for installation. Signal wires does not require ferrules, especially lugs to establish a reliable connection. Spring clamp terminals also offers an increased resistance with vibration and shock as tourque applied to the wire is constant unlie screw terminals that may tend to loosen overtime. These terminal bases are composed of Five (5) sets of Removable Terminal Block (RTB) wherein RTB 0 is used for Power interface, RTB 1 and 2 used for Input signal wiring and RTB 4 and 5 used for Output signal wiring. Compatible wire size for use with the removable Terminal Blocks is 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater and maximum insulation thickness of 3/64 inch or 1.2mm.The RTBs may be removed or inserted even if signal wires are already wired to the terminals.