GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: 1734D-IA8XOW8S
1734D-IA8XOW8S
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1734D-IA8XOW8S 1734D-IA8XOW8S//A
Common misspellings:
- l734D-IA8XOW8S
- 173AD-IA8XOW8S
- 1734D-1A8XOW8S
- 1734D-lA8XOW8S
- 1734D-IAbXOW8S
- 1734D-IA8X0W8S
- 1734D-IA8XOWbS
- 1734DIA8XOW8S
Technical Specifications for 1734D-IA8XOW8S
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | 1734D POINTBlock I/O |
| Product Type: | Accessory |
| Part Number: | 1734D-IA8XOW8S |
| Module Type | Combination I/O Module |
| No. of Channels | Eight (8) 120VAC Input; Eight (8) Relay Output |
| Input Voltage, nominal | 120VAC |
| Input Voltage Range | 85-132VAC, 47-63Hz |
| Output Type | Form A, normally open (N.O.) Single Pole, Single Throw (SPST) |
| Output Voltage Range | 5-30V dc @ 2.0A resistive 48V dc @ 0.5A resistive 125V dc @ 0.25A resistive 125V ac @ 2.0A resistive 240V ac @ 2.0A resistive |
| Supported Communication Protocol | DeviceNet |
| Number of POINT I/O Expansion Modules | 12 maximum added at expansion port |
| Wire Size | 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max |
| Connection Type | Spring clamp |
| Enclosure type rating | None (open-style) |
| Operating Temperature: | -20É55 ¡C (-4É131 ¡F) |
| Surrounding Air Temperature | 55 ¡C (131 ¡F) |
| Relative Humidity | 5É95% noncondensing |
About 1734D-IA8XOW8S
The Allen-Bradley product with catalog number 1734D-IA8XOW8S is a POINTBlock I/O device. This module is a combination Input and output module with Eight (8) AC input channels and Eight (8) Relay output channels in Form A, Normally Open contacts or Single Pole Single Throw (SPST) configuration. POINTBlock I/O are cost effective alternative in implementing a modular Remote I/O or Distributed I/O application. This platform is technically a compact version of POINT I/OÕs DeviceNet adapter 1734-PDN and Discrete AC input modules and Relay Output modules. It supports installation of up to Twelve (12) additional POINT I/O modules or up to 64 I/O points. All POINTBlock I/O products, including the 1734D-IA8XOW8S have integrated DeviceNet interface that supports communication speed of 125K, 250K or 500K bits/second. The DeviceNet interface conforms to the ODVA standard. The 1734D-IA8XOW8S input channels is compatible with 120VAC voltage signals with effective range of 85-132VAC along an input frequency of 47-63 Hz. The minimum ON state voltage 65VAC and a maximum OFF state voltage of 43VAC. The POINTBlock I/O device has a nominal input impedance 17.0k½ with fixed and configurable input delay time of 20ms, hardware fixed plus 0-65ms user configurable input delay for OFF to ON and ON to OFF transitions. The relay output channels are Form A contacts, which may also be referred to as Normally Open (N.O.) contacts or Single Pole, Single Throw (SPST) switch. The output channels are compatible for a variety of output voltage ranges such as 5-30V dc at 2.0A resistive load; 48V dc at 0.5A resistive load; 125V dc at 0.25A resistive load; 125V ac at 2.0A resistive load and 240V ac at 2.0A resistive load. At rated power, the output current of the moduleÕs channels are 2A @ 5-30V dc; 0.5A @ 48Vdc; 0.25A @ 125V dc; 2A @ 125V ac and 2A @ 240V ac for resistive loads and 2.0A steady state @ 5-30V dc, L/R - 7ms; 0.5A steady state @ 48V dc, L/R = 7ms; 0.25A steady state @ 125V dc, L/R = 7ms; 2.0A steady state, 15A make @ 125V ac;PF = cos _ = 0.4 and 2.0A steady state, 15A make @ 240V ac, PF = cos _ = 0.4 for Inductive loads. The 1734D-IA8XOW8SÕs Output channel power ratings have different values depending on the type of load connected to the output channel. This includes 250W max for 125V ac resistive loads; 480W max for 240V ac resistive loads; 60W max for 28.8V dc resistive loads; 24W max for 48V dc resistive loads; 31W max for 125V dc resistive loads; 250VA max for 125V ac inductive loads; 480VA max for 240V ac inductive loads; 60VA max for 28.8V dc inductive loads; 24VA max for 48V dc inductive loads and 31VA max for 125V dc inductive loads. This module has One (1) Module Status; One (1) Network Status; Sixteen (16) yellow I/O status indicators wherein Eight (8) LED indicators are used for the individual input channels and another Eight (8) LED are intended for the output channels.F.A.Q for 1734D-IA8XOW8S
| Q: 1. What is the difference between the 1734D-IA8XOW8S and 1734D-IA8XOW8? | A: The difference between the 2 products are the type of wire connections. The 1734D- IA8XOW8S has spring clamp terminals while the 1734D-IA8XOW8 has cage clamp terminals. |
|---|---|
| Q: 2. Can I use the output channels to drive inductive loads? | A: Yes, relay output channels are compatible for use with inductive loads and other high current loads. |
| Q: 3. What is the contact form of the output channels? | A: The relay output channels are Form A contacts or Normally Open contacts. |
PDFsupply Tech
The 1734D-IA8XOW8S is a POINTBlock I/O with Eight (8) 120VAC input channel and Eight (8) Form A contacts and Spring clamp terminal blocks. It has similar capabilities when compared to the 1734D-IA8XOW8 except that the latter uses cage clamp terminals.
