GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: 1734D-IA8XOW8
1734D-IA8XOW8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1734D-IA8XOW8 1734D-IA8XOW8//A
Common misspellings:
- l734D-IA8XOW8
- 173AD-IA8XOW8
- 1734D-1A8XOW8
- 1734D-lA8XOW8
- 1734D-IAbXOW8
- 1734D-IA8X0W8
- 1734D-IA8XOWb
- 1734DIA8XOW8
Technical Specifications for 1734D-IA8XOW8
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | 1734D POINTBlock I/O |
| Product Type: | Accessory |
| Part Number: | 1734D-IA8XOW8 |
| Module Type | Combination I/O Module |
| No. of Channels | Eight (8) 120VAC Input; Eight (8) Relay Output |
| Input Voltage, nominal | 120VAC |
| Input Voltage Range | 85-132VAC, 47-63Hz |
| Output Type | Form A, normally open (N.O.) Single Pole, Single Throw (SPST) |
| Output Voltage Range | 5-30V dc @ 2.0A resistive 48V dc @ 0.5A resistive 125V dc @ 0.25A resistive 125V ac @ 2.0A resistive 240V ac @ 2.0A resistive |
| Supported Communication Protocol | DeviceNet |
| Number of POINT I/O Expansion Modules | 12 maximum added at expansion port |
| Wire Size | 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max |
| Connection Type | Cage clamp |
| Enclosure type rating | None (open-style) |
| Operating Temperature: | -20É55 ¡C (-4É131 ¡F) |
| Surrounding Air Temperature | 55 ¡C (131 ¡F) |
| Relative Humidity | 5É95% noncondensing |
About 1734D-IA8XOW8
The 1734D-IA8XOW8 is a POINTBlock I/O module that is manufactured by Allen-Bradley. This POINT Block I/O has Eight (8) 120VAC input channels and Eight (8) Relay Output channels. It also has a DeviceNet interface to allow the POINTBlock device to communicate with DeviceNet scanner or DeviceNet enabled controllers for reading and writing I/O data to and from the POINTBlock and installed POINT I/O modules. Supported DeviceNet data transmission speed by this POINTBlock I/O device are 125K, 250K or 500K bits/second. The POINTBlock I/O device is recognized as a DeviceNet in the network. The input channels of this devices operated at a nominal input voltage signals of 120VAC with range of 85-132VAC and input frequency of 47-63 Hz. The minimum ON state voltage of each channel is 65VAC and a maximum OFF state voltage of 43VAC. The relay output channels are Form A contacts, also knows as Normally Open (N.O.) contacts or Single Pole, Single Throw (SPST) switch. The output Voltage range of each output channels are 5-30V dc at 2.0A for resistive load; 48V dc at 0.5A resistive load; 125V dc at 0.25A resistive load; 125V ac at 2.0A resistive load and 240V ac at 2.0A resistive load. The output Current rating at rated load power includes 2A @ 5-30V dc; 0.5A @ 48Vdc; 0.25A @ 125V dc; 2A @ 125V ac and 2A @ 240V ac for resistive loads and 2.0A steady state @ 5-30V dc, L/R - 7ms; 0.5A steady state @ 48V dc, L/R = 7ms; 0.25A steady state @ 125V dc, L/R = 7ms; 2.0A steady state, 15A make @ 125V ac;PF = cos _ = 0.4 and 2.0A steady state, 15A make @ 240V ac, PF = cos _ = 0.4 for Inductive loads. The output Power ratings are 250W max for 125V ac resistive loads; 480W max for 240V ac resistive loads; 60W max for 28.8V dc resistive loads; 24W max for 48V dc resistive loads; 31W max for 125V dc resistive loads; 250VA max for 125V ac inductive loads; 480VA max for 240V ac inductive loads; 60VA max for 28.8V dc inductive loads; 24VA max for 48V dc inductive loads and 31VA max for 125V dc inductive loads. The 1734D-IA8XOW8 has a Pointbus Output Current of 1A max @ 5V ac output with DeviceNet current requirement of 95mA maximum for POINTBlock; 350mA for maximum with expansion of 12 POINT I/O modules. This module has One (1) Module Status; One (1) Network Status; Sixteen (16) yellow I/O status indicators wherein Eight (8) are for the individual input channels and another Eight (8) for the output channels. Use Solid or Stranded copper wire when terminating signal devices with wire size range of 14 AWG (2.5mm2) - 22 AWG (0.25mm2). Insulation thickness must not be greater than 3/64 inch (1.2mm) and temperature rating of 75 Degree Celsius or higher.F.A.Q for 1734D-IA8XOW8
| Q: 1. What is the operating voltage range of the input channels? | A: The input channels operate at a voltage range of 85-132VAC with frequency of 47-63 Hz. |
|---|---|
| Q: 2. What is the output voltage range of the output channels? | A: The output voltage range are 5-30V dc @ 2.0A resistive 48V dc @ 0.5A resistive 125V dc @ 0.25A resistive 125V ac @ 2.0A resistive 240V ac @ 2.0A resistive |
| Q: 3. How many expansion POINT I/O modules does the 1734D-IA8XOW8 support? | A: It supports up to Twelve (12) POINT I/O modules. |
PDFsupply Tech
The 1734D-IA8XOW8 is a POINTBlock I/O with Eight (8) 120VAC input channel and Eight (8) Form A contacts. This POINTBlock I/O module has cage clamp terminals with the Relay output channels offering a distinct advantage as relay output channels is compatible for AC and DC application and ideally used for loads that require high current.
