GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: 1734D-IA8XOA8S
1734D-IA8XOA8S
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1734D-IA8XOA8S 1734D-IA8XOA8S//A
Common misspellings:
- l734D-IA8XOA8S
- 173AD-IA8XOA8S
- 1734D-1A8XOA8S
- 1734D-lA8XOA8S
- 1734D-IAbXOA8S
- 1734D-IA8X0A8S
- 1734D-IA8XOAbS
- 1734DIA8XOA8S
Technical Specifications for 1734D-IA8XOA8S
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | 1734D POINTBlock I/O |
| Product Type: | Accessory |
| Part Number: | 1734D-IA8XOA8S |
| Module Type | Combination I/O Module |
| No. of Channels | Eight (8) 24VDC Input; Eight (8) 24VDC Output |
| Input Voltage, nominal | 120VAC |
| Input Voltage Range | 85-132VAC |
| Output Voltage, nominal | 120VAC |
| Output Voltage Range | 85-132VAC |
| Supported Communication Protocol | DeviceNet |
| Number of POINT I/O Expansion Modules | 12 maximum added at expansion port |
| Wire Size | 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max |
| Connection Type | Spring clamp |
| Enclosure type rating | None (open-style) |
| Operating Temperature: | -20É55 ¡C (-4É131 ¡F) |
| Surrounding Air Temperature | 55 ¡C (131 ¡F) |
| Relative Humidity | 5É95% noncondensing |
About 1734D-IA8XOA8S
The 1734D-IA8XOA8S is a POINTBlock I/O that functions as AC combination module. This module is manufactured by Allen-Bradley that is designed with Eight (8) 120VAC input channels and Eight (8) 120VAC output channels. I/O channels are operable at Voltage ranges of 85-132VAC along frequency of 47-63Hz. A POINTBlock system is technically a POINT I/O system composed of packaged or combination of POINT I/O modules. As to the 1734D-IA8XOA8S, this POINTBlock module is composed of Two (2) 1734 AC input module, Two (2) 1734 AC output module and 1734-PDN DeviceNet communication adapter. Only DeviceNet communication is supported by POINTBlock modules. POINTBlock I/O system may be used as an alternative to POINT I/O system as the POINBlock I/O supports a limited number of installation wherein up to Twelve (12) POINT I/O modules may be installed or up to 64 I/O channels. This is ideal for small scale expansion to save costs while achieving the same expansion capability. POINTBlock I/O system are directly mounted to a DIN rail. The moduleÕs body and the installation DIN rail provides the necessary grounding connection. Use DIN rail that is made of good conductive material that may not be easily affected by oxidation and corrosion. POINTBlock I/O system may be used as remote I/O systems for Programmable Logic Controller (PLC) or Programmable Automation Controller (PAC) components especially the Logix controller platform particularly CompactLogix and ControlLogix. Communication to these controllers or scanners is established via the embedded DeviceNet communication interface which supports 125K, 250K or 500K bits/second. With the DeviceNet communication, the local data map of the 1734D-IA8XOA8S may be treated as local I/O, allowing integration to controller logic to implement the necessary automation. The integrated DeviceNet also supports AutoBaud configuration for automatic detection of communication settings without manually the need for manual configuration. The 1734D-IA8XOA8S POINTBlock I/O supports input characteristics such as Change-of-State (COS), Cyclic and polled. Change of State (COS) is commonly used in fast application particularly high-speed positioning control of conveyors and carriages. COS allows immediate processing of input once a signalÕs change of state is detected including relevant logic connection without waiting for the controller to finish the standard logic execution cycle. The Polled I/O setting regularly polls the input channel, depending on the defined polling time while the cyclic setting monitors and execute the logic based on the standard logic execution cycle. The 1734D-IA8XOA8S has One (1) Module Status; One (1) Network Status; Sixteen (16) yellow I/O which consists of Eight (8) Discrete Input and Eight (8) Discrete Output status indicators. These status indicators provide local indication of the moduleÕs operation that may be used as reference to aid in troubleshooting of the device. Other parameters of the 1734D-IA8XOA8S include Power Dissipation of 2.0W maximum @ 24V dc and Power Consumption of 8.2W maximum @ 24V dc. The POINTBlock I/O field Power Bus voltage range is 10-28.8VDC with nominal supply voltage of 24VDC and maximum of 10A. It has a physical dimension of 3.00H x 2.36W x 5.25L or 76.2 Hx 60.0W x 133.4L.F.A.Q for 1734D-IA8XOA8S
| Q: 1. What is the difference between the 1734-IA8X0A8 and 1734-IA8X0A8S? | A: The difference is the connection type. The 1734-IA8X0A8 uses cage clamp terminals while the 1734-IA8X0A8S uses spring clamp terminals. |
|---|---|
| Q: 2. What is the appropriate wire size for the 1734-IA8X0A8S? | A: Appropriate wire size is 14 AWG (2.5mm2) - 22 AWG (0.25mm2) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max |
| Q: 3. How many terminals does the 1734-IA8X0A8S have? | A: This module has 40 spring clamp terminals. |
PDFsupply Tech
The 1734D-IA8XOA8S belongs to the POINTBlock I/O system. This module has Eight (8) 120Vac inputs and Eight (8) 120VAC output channels. It uses spring clamp terminals for connection of signal wires unlike the 1734D-IA8XOA8 that uses cage clamp terminals. This module is specifically compatible with AC signaling and output devices.
