GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: 1734D-IA16S
1734D-IA16S
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1734D-IA16S 1734D-IA16S//A
Common misspellings:
- l734D-IA16S
- 173AD-IA16S
- 1734D-1A16S
- 1734D-lA16S
- 1734D-IAl6S
- 1734DIA16S
Technical Specifications for 1734D-IA16S
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | 1734D POINTBlock I/O |
| Product Type: | Accessory |
| Part Number: | 1734D-IA16S |
| Module Type | Discrete AC Input Module |
| No. of Channels | Sixteen (16) input channels |
| Input Voltage, nominal | 120V AC @ 60 Hz |
| Input Voltage Range | 85...132V AC, 47...63 Hz |
| Supported Communication Protocol | DeviceNet |
| Number of POINT I/O Expansion Modules | 12 maximum added at expansion port |
| Wire Size | 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) solid or stranded copper rated @ 75¡C or greater 3/64 inch (1.2mm) insulation max |
| Connection Type | Spring clamp |
| Enclosure type rating | None (open-style) |
| Operating Temperature: | -20É55 ¡C (-4É131 ¡F) |
| Surrounding Air Temperature | 55 ¡C (131 ¡F) |
| Relative Humidity | 5É95% noncondensing |
| Operating Vibration | 5 g @ 10É500 Hz |
| Operating Shock | 30 g |
About 1734D-IA16S
This 1734D-IA16S is POINTBlock AC input module with Sixteen (16) Discrete input channels and spring clamp terminals. This module has a DeviceNet connector used to establish communication with DeviceNet scanners. POINTBlock I/O product category is a cost-effective solution for implementing a POINT I/O type rack with lesser installation cost. POINTBlock I/O supports up to Twelve (12) POINT I/O modules for expansion. Technically, a POINTBlock I/O is composed of a 1734-PDN and a 16-channel input or output. The DeviceNet interface of the POINTBlock I/O enables connection to the DeviceNet scanner in the network. This permits the POINTBlock I/O to function similarly as a communication adapter, similar to the 1734-AND however, the POINTBlock I/O only supports up to Twelve (12) additional POINT I/O module or up to 64 I/O points which reduce time and overall costs when designing an equivalent system using other platform. The POINTBlock I/O is seen in the DeviceNet network as a DeviceNet node with MAC ID switches used for dialing in the starting address. Each channel of the 1734D-IA16S features an operating voltage range of 85-132VAC with a nominal input value of 120VAC with frequency of 60Hz. The individual input channelÕs minimum ON state voltage is 69VAC while the maximum ON state voltage is 132VAC. The moduleÕs maximum OFF-state voltage is 43VAC. The minimum ON state current is 5.0 mA while the OFF-state current of the input channels is 2.5mA. The filter times may be individually configured, according to the input signalÕs characteristic. The filter times for OFF to ON and ON to OFF transitions are similar however, can be configured individually. Set this filter time to condition the input signal, to eliminate the processing of false triggered signals and noises. It also supports Choice of change-of-state (COS) which allow for faster processing of signals based on the change of signal status. Change of state may be used in fast applications such as position control. It also supports polled configuration and cyclic operation. These updated channel configuration increases available network bandwidth in the backplane by scheduled sending of I/O messages. The POINTBlock I/O terminals consists of Sixteen (16) spring clamp terminals. Only use solid or stranded copper wire with size of 14 AWG (2.5mm2 ) - 22 AWG (0.25mm2 ) and insulation rating of 75 Deg. Celsius or Higher. Insulation thickness shall be maximum of 3/64 inch or 1.2 mm. The POINTBlock AC input module is provided with status indicators such as One (1) red/green module status indicator with RED indicating an abnormal state and Green pertaining to the module in normal operating state. The network status indicator also has One (1) red/green network status indicator with Red LED signaling an error in network communication and green as normal operation. The Sixteen (16) yellow I/O status indicators are individually used for each channel. Yellow LED refers to an activated channel.F.A.Q for 1734D-IA16S
| Q: 1. What is the difference between 1734D-IA16 and 1734D-IA16S? | A: The main difference between the modules is the connection type offered by the terminal blocks. The 1734D-IA16 has cage clamp terminals while the 1734D-IA16S has spring clamp terminals. |
|---|---|
| Q: 2. Does the 1734D-IA16S support installation of additional POINT I/O module? | A: Yes, this module supports up to 12 additional POINT I/O module. |
| Q: 3. Does this module come with module indicators? | A: Yes, the embedded module indicators include One (1) Module Status; One (1) Network Status; Sixteen (16) yellow I/O status indicators |
PDFsupply Tech
The 1734D-IA16S is a POINTBlock I/O Discrete AC input module. This POINTBlock I/O supports installation of additional Twelve (12) POINT I/O modules. The function of this module is technically the same as the 1734D-IA16 except that the latter uses cage clamp terminal while the 1734D-IA16S uses spring clamp terminals.
