GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Point I/O » You are here: 1734-IE4S
1734-IE4S
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1734-IE4S 1734-IE4S//A
Common misspellings:
- l734-IE4S
- 173A-IE4S
- 1734-1E4S
- 1734-lE4S
- 1734-IEAS
- 1734IE4S
Technical Specifications for 1734-IE4S
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | POINT Guard I/O |
| Product Type: | Analog I/O Module |
| Part Number: | 1734-IE4S |
| Module Type | Safety Analog Input Module |
| No. of Channels | Four (4) Voltage, current and Tachometer input channels |
| Input Current Signal | 0-20 mA; 4-20 mA |
| Input Current Code Range | -8192É+32767 |
| Input Voltage Signal | Bipolar modes: -32768/+32767 Unipolar modes: 0/+32767 |
| Input Voltage Code Range | -8192É+32767 |
| Tachometer Range | 0É1000 |
| Tachometer frequency range | 1É1000 Hz |
| ADC Resolution | 12 bits |
| Accuracy | Voltage mode:@ 25¡ C [77¡ F]: ±0.5% full scale Drift: ±0.02% full scale/¡C Current mode: @ 25¡ C [77¡ F]: ±0.6% full scale Tachometer Mode: @ 25¡ C [77¡ F]: ±2% gain error drift: ±0.1%/¡C additional gain error, due to temperature Examp |
| Calibration | Factory-calibrated; no user-calibration |
| I/O scan rate | ² 6 ms |
| Indicators | 4 analog input (yellow/red) 4 sensor power (green/red) 1 power (green/yellow |
About 1734-IE4S
The POINT I/) module with catalog number 1734-IE4S is a electronic component that is part of the POINT GUARD I/O product family. This module is safety module that features Four (4) input channels with Seven (7) selectable input ranges such as ±10V, ±5V, 0-5V, 0-10V for Voltage, 4-20 mA, 0-20 mA for Current and Tachometer signal. When in Tachometer mode, the 24VDC switching signals are converted inti pulses per second signal. The higher switching frequency translates to more pulses which may represent the actual speed detected by the Tachometer. The power output of each sensors are individually monitored and current limited. Being an analog input module, this module may perform the operation of a standard analog input module. It can be used for measuring process variables such a Pressure, Level, Flow, Temperature and other process variables. It supports dual mode operation such as Single channel and dual channel operation. Both modes comply with Safety Integrity Level (SIL) - 3 rated safety devices and applications. When in dual-channel mode, consistency between Two (2) input signals are made. This enables the module to be used in applications that not only require SIL3 level but PLe and Cat. 4 safety categories also. This module may also be configured with a discrepancy time to define how long Two (2) channels may have difference before the module declares a fault. POINT GUARD I/O modules may be directly installed to a POINT I/O assembly. It may be used for implementing Common Industrial Protocol (CIP) Safety Architectures. It may be used in Ethernet I/P or DeviceNet safety architectures. Safety controllers in general directly control the safety outputs while it may also be used to control standard outputs or Programmable Logic Controllers (PLC). POINT GUARD I/O including the 1734-IE4S are approved and certified for use in application with safety level requirement of Performance Level e (PLe) / Category 4 and SIL3 where de-energized state is treated as the safe state. The converted signal must be defined with ranges such as the input range, Low Engineering Value, and High Engineering Value. If the incoming signal is 1V, the data converted by the PLC is 1000. For 5.5V, the data is 5500. Similar conversion method are applied to other input signal ranges. It may also be configured with process alarms which is a feature that standard analog analog input signals have. Configurable process alarms are High High alarm, High alarm, Low alarm, and Low Low alarm.F.A.Q for 1734-IE4S
| Q: 1. How many channels does the 1734-IE4S have? | A: This module has Four (4) input channels. |
|---|---|
| Q: 2. What are the input signals supported by this module? | A: Supported input signal types are ±10V, ±5V, 0-5V, 0-10V for Voltage, 4-20 mA, 0-20 mA. |
| Q: 3. Is this module compatible for direct installation to a POINT I/O system? | A: This module may be directly installed to a POINT I/O rack. |
PDFsupply Tech
The 1734-IE4S is a POINT GUARD I/O analog input module. This module has Four (4) input channels and certified for use in SIL 3 and PLe applications. It may also be used as standard analog input module which can measure process variables such as Pressure, Level, Flow, Temperature and other variables.
