GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-l18bwb-exnd
1760-l18bwb-exnd
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-l18bwb-exnd 1760-l18bwb-exnd//A1760-l18bwb-exnd//B
Common misspellings:
- l760-l18bwb-exnd
- 176o-l18bwb-exnd
- 1760-118bwb-exnd
- 1760-ll8bwb-exnd
- 1760-l1bbwb-exnd
- 1760-l188wb-exnd
- 1760-l18bw8-exnd
- 1760l18bwbexnd
Technical Specifications for 1760-l18bwb-exnd
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-L18BWB-EXND |
| Type of component | Pico controller |
| Voltage type | DC |
| Voltage range | 24V DC |
| Input current | 140 mA nominal |
| Inputs | 12 |
| Outputs | 6 |
| Indicators | Yes |
| Display | LCD |
| Mechanical switching operation | Yes |
| Electrical isolation | Yes, to the outputs only |
About 1760-l18bwb-exnd
The 1760-L18BWB-EXND Pico controller is a DC Pico controller that is part of the 1760 series of Pico controllers by Allen-Bradley that are exclusively oriented towards the automation industry. This Pico controller operates with a voltage rating of 24 Volts DC with a tolerable variation range of +20 and -15 percent, depending on the equipment that is used around the controller and on its programming. This controller also operates with a nominal current rating of 140 milliamps which can be reached by using the maximum voltage rating of the controller. The Allen-Bradley 1760-L18BWB-EXND DC Pico controller comes with 12 inputs and 6 relay outputs. The number of channels can be expanded by using an expansion module that is compatible with the Pico controller and its programming. It is recommended to have a trained technician perform both installations. A standard isolation rating of 400 Volts is provided when the controller and an expansion module are used together.
The Allen-Bradley 1760-L18BWB-EXND DC Pico controller generates a nominal power dissipation rating of 3 to 5 Watts at a voltage of 24 Volts DC. This controller works with a debounce time of 20 milliseconds. The signal range of the module goes from 0 to 10 Volts DC and it has an analog resolution of 0.1 Volts and an input impedance rating of 11.2 kiloohms. The outputs of this controller cannot be connected in parallel to increase the output. The Allen-Bradley 1760-L18BWB-EXND DC Pico controller does not include a display or a keypad, but it does include status indicators that show the users the current status of the Pico controller and it also includes a port so that the controller can be connected to a PC. The controller can be programmed by using ladder diagrams, or through a PC. These programs can also be printed out in DIN, ANSI, or Pico formats.
The Allen-Bradley 1760-L18BWB-EXND DC Pico controller has a voltage range of 24 Volts DC. It has a nominal input current rating of 140 milliamps.
F.A.Q for 1760-l18bwb-exnd
