GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-l12awa
1760-l12awa
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1760-L12AWA I/O module is a Pico Controller I/O module with 4 relay output points and 8 input points. It uses AC voltage and it comes with a display screen and a keypad for control.
Other Available Revisions for the 1760-l12awa 1760-l12awa//A
Common misspellings:
- l760-l12awa
- 176o-l12awa
- 1760-112awa
- 1760-ll2awa
- 1760l12awa
Technical Specifications for 1760-l12awa
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-L12AWA |
| Product type | I/O module |
| Number of inputs | 8 |
| Number of outputs | 4 relay outputs |
| Real-time clock | Included |
| Display screen | Included |
| Keypad | Included |
| Voltage type | AC |
About 1760-l12awa
The 1760-L12AWA module is an Allen-Bradley module from the Pico Controller series that operates with 120/240 Volts AC. The 1760-L12AWA module comes with 8 inputs and with 4 outputs that are relay outputs. It is not an analog I/O module, but it comes with a real-time clock, a display screen, and a keypad. This module should not be switched on with reed contacts because it experiences a brief power surge when it is powered on for the first time, and this power surge can cause reed contacts to burn or even to melt. For its input signals, the 1760-L12AWA I/O module has an “off” signal range of 0 to 40 Volts AC and an “on” signal range of 79 to 264 Volts AC.
The Allen-Bradley 1760-L12AWA Pico Controller I/O module has a rated sinusoidal incoming power range of 100 to 240 Volts AC, +10%/-15%, at a frequency of 50 to 60 Hertz. Its line current ratings are 40 milliamps of nominal line current at 115/120 Volts AC and 60 Hertz and 20 milliamps of nominal line current at 230/240 Volts AC and 50 Hertz. The power consumption ratings of the 1760-L12AWA I/O module is 5 Volts-Amps nominal at both 115/120 Volts AC and 230/240 Volts AC. This module has electrical isolation for the outputs but no electrical isolation for the power supply or between the inputs. The outputs on the 1760-L12AWA I/O module cannot be connected in parallel to increase the output of the module. Its mechanical switching operation rating is approximately 10 million operations.
The Allen-Bradley 1760-L12AWA I/O module is a Pico Controller I/O module with 4 relay output points and 8 input points. It uses AC voltage and it comes with a display screen and a keypad for control.
F.A.Q for 1760-l12awa
