GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-ib12xow4if
1760-ib12xow4if
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-ib12xow4if 1760-ib12xow4if//A
Common misspellings:
- l760-ib12xow4if
- 176o-ib12xow4if
- 1760-i812xow4if
- 1760-ibl2xow4if
- 1760-ib12x0w4if
- 1760-ib12xowAif
- 1760ib12xow4if
Technical Specifications for 1760-ib12xow4if
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-IB12XOW4IF |
| Description | GFX combination module |
| Input | 12/4 digital/analog |
| Output | 4 |
| Voltage | 24 Volts DC |
| Input impedance | 11.2 kiloohms |
| Digital resolution | 10 bit |
| Mechanical switching frequency | 10 Hertz |
| Temperature | -20-55 degrees Celsius |
About 1760-ib12xow4if
The 1760-IB12XOW4IF Pico Controller module is an Allen-Bradley Pico GFX combination module. The combination module is connected to the rear side of the GFX processor. This combination module runs with 12 digital inputs and 4 outputs. It is also equipped with 4 analog inputs. This Series A combination module has a current rating of 8 Amps and a voltage rating of 24 Volts DC. The relay outputs of the module are located at the bottom of the module. The analog inputs are placed at the top of the module. The 1760-IB12XOW4IF combination module has an off-state voltage of less than 5 Volts DC for channels I1 to I6 and I9 to I10, and of greater than 8 Volts DC for channels I7, I8, I11 and I12. For the signal delay, the module has a debounce on rating of 20 milliseconds, and it has a typical debounce off rating of 0.025 milliseconds for points I1 to I4. The module has a digital resolution of 10 bits with 0 to 1023 counts and an input impedance of 11.2 kiloohms.
The Allen-Bradley 1760-IB12XOW4IF Pico Controller Series A combination module comes with a mechanical switch operation rating of about 10 million operations. The mechanical switching frequency rating of the module is 10 Hertz. The relays can support an inductive load with 0.5 Hertz frequency. The resistive lamp load is rated at 2 Hertz frequency. The complete Pico Controller that the 1760-IB12XOW4IF Pico Controller Series A combination module comes with a counter and an incremental encoder for data processing. During the installation process, the ambient environmental temperature should be set between -20 and 55 degrees Celsius in a corrosion-free environment. The module comes with an open enclosure and it should not be exposed to high levels of radiation or to sources of heat.
The Allen-Bradley 1760-IB12XOW4IF module is a Pico Controller GFX combination module. It comes with 4 analog inputs.
F.A.Q for 1760-ib12xow4if
