GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-ia12xow6i
1760-ia12xow6i
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-ia12xow6i 1760-ia12xow6i//A
Common misspellings:
- l760-ia12xow6i
- 176o-ia12xow6i
- 1760-ial2xow6i
- 1760-ia12x0w6i
- 1760ia12xow6i
Technical Specifications for 1760-ia12xow6i
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-IA12XOW6I |
| Description | I/O expansion module |
| Voltage | 120/240 Volts DC |
| Frequency | 50/60 Hertz |
| Inputs | 12 |
| Output | 6 |
| Mount | DIN Rail |
| Cable | 22-12 AWG |
| Weight | 300 grams |
About 1760-ia12xow6i
The 1760-IA12XOW6I module is an Allen-Bradley Pico Controller I/O expansion module. It runs with a voltage rating of 120 to 240 Volts AC. The operating frequency range of the module is 50 to 60 Hertz. The module has a total of 12 inputs and 6 outputs. This module is made to be used with the Pico controllers. It has been certified with standards like the cULus, CE, CSA, and C-Tick standards. The Allen-Bradley Pico Controller 1760-IA12XOW6I module can be mounted using a DIN rail. The module has 6 relay outputs and points S7 and S8 can be used as markers. The front section of the expansion unit has LED indicators to show the status of the incoming power as well as the “RUN” and “STOP” operating mode status. The temperature should be set between -25 and 55 degrees Celsius for regular operation.
The Allen-Bradley Pico Controller 1760-IA12XOW6I module is small in size with dimensions of 57 millimeters in depth, 107.5 millimeters in width, and 90 millimeters in height. It weighs around 300 grams. It uses a solid or stranded AWG 22 to AWG 12 wires for connections. The air pressure should be maintained between 795 and 1080 hPa. The operating environment should be clean and corrosion-free. The 1760-IA12XOW6I module helps to perform simple logic and real-time clock operations. It comes with a high-speed counter. The 1760-IA12XOW6I module has a tightening torque rating of 0.57 to 0.79 N-m. The expansion I/O module has a line conducted interference of 10 Volts. It has an electrostatic discharge rating of 9 Kv of air discharge and 6 Kv of contact discharge. The expansion I/O module has a write cycles rating of less than 100,000. The expansion module should be handled carefully during installation.
The Pico Controllers 1760-IA12XOW6I module is an Allen-Bradley I/O expansion module. It has a voltage rating of 120 to 240 Volts AC.
F.A.Q for 1760-ia12xow6i
