GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-dub
1760-dub
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-dub 1760-dub//A
Common misspellings:
- l760-dub
- 176o-dub
- 1760-du8
- 1760dub
Technical Specifications for 1760-dub
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-DUB |
| Description | Human interface module |
| Voltage | 24 Volts DC |
| Current | 250 milliamps |
| Mounting | DIN Rail |
| IP rating | IP 65 |
| Resolution | 132 x 64 pixels |
| Temperature | 0-60 degrees Celsius |
| Software | PicoSoft Pro software |
About 1760-dub
The Allen-Bradley 1760-DUB display is a display unit for the Pico GFX 70 controllers. This display unit is a compact unit. The 1760-DUB display unit comes with pushbuttons that are located on the front panel. There are different buttons like the “DEL,” “ALT,” “OK,” and “ESC” buttons to perform different functions. The GFX 70 module is a human-machine interface module that allows the operators to configure the GFX controller system. It supports a Pico link that enables the connection for up to 8 stations from a single control system. By using the interface module, the operators can control any device in the network and display data from it. The keypad can be used to configure any device on the network. The 1760-DUB display supports logical functions, timing relay and counter functions, time switch functions, PID controller functions, and display functions.
The complete Allen-Bradley Pico processor comprises the power supply, the Pico link terminals, the expansion module connector, the LED indicators, and the sockets for the memory module. The Allen-Bradley 1760-DUB display comes with a monochrome display screen with a resolution of 132 x 64 pixels and a display area of 62 x 33 millimeters. The module can be mounted by using a DIN Rail mount and 2 fixing rings attached to 22.5-millimeter mounting holes on the back of the unit. The environmental temperature should be set between 0 and 60 degrees Celsius for regular operation. The 1760-DUB display is water resistant and certified with an IP 65 environmental protection rating. It has a voltage rating of 24 Volts DC and current rating of 250 milliamps.
The Pico Controllers 1760-DUB display is a display unit for the Pico GFX 70 controllers. It is manufactured by Allen-Bradley.
F.A.Q for 1760-dub
