GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-cbl-pm02
1760-cbl-pm02
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-cbl-pm02 1760-cbl-pm02//A1760-cbl-pm02//a
Common misspellings:
- l760-cbl-pm02
- 176o-cbl-pm02
- 1760-c8l-pm02
- 1760-cb1-pm02
- 1760-cbl-pmo2
- 1760cblpm02
Technical Specifications for 1760-cbl-pm02
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-CBL-PM02 |
| Description | Programming cable |
| Connector type | D connector |
| Temperature | -25 to 55 degrees Celsius |
| Storage temperature | -40 to 70 degrees Celsius |
| Baud rate | 9600 |
| Programmable software | Picosoft programming |
| Color | Black |
About 1760-cbl-pm02
The 1760-CBL-PM02 cable is an Allen-Bradley programming cable. It helps to connect a PC to a Pico processor. It is a Bulletin 1760 controller cable for the Pico processor. It is black and it is manufactured using high-quality industrial material. One end of the cable comes with a D-connector while the other end is connected to the Pico processor unit. The Allen-Bradley Pico controller helps to run simple logic, timing, counting, and real-time clock operations. The cable supports high speed data transfers. The cable is compatible with different Pico controller units. The D-connector is connected at the COM port of the computer for programming, while the other end is connected to the bottom of the Pico processor.
The Allen-Bradley 1760-CBL-PM02 cable should be used in an environment with a temperature set between -25 to 55 degrees Celsius. While not in use, it can be stored in a temperature range between -40 and 70 degrees Celsius. The 1760-CBL-PM02 cable should not be exposed to sources of heat generation. It should also not be bent too much while in use The cable supports a baud rate of 9600 baud with different configurations including the Stop bit, No parity, 1 (CRC/BCC) configurations. The Pico controller unit has LED indicators on the front side that show the progress of the data transfers and which inputs and outputs are active. There are output LED indicators that are present along with the analog and digital inputs.
The 1760-CBL-PM02 cable is a programming cable manufactured by Allen-Bradley. It is used to connect a PC with a Pico processor.
F.A.Q for 1760-cbl-pm02
