GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-OW2
1760-OW2
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-OW2 1760-OW2//A
Common misspellings:
- l760-OW2
- 176o-OW2
- 1760-0W2
- 1760OW2
Technical Specifications for 1760-OW2
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part Number | 1760-OW2 |
| Product Type | Expansion Module |
| Product Line | 1760 Pico Controllers |
| Outputs | 2 (relay) |
| Line Voltage | 24V DC |
| Power Ratings | 240V AC, 10 A, 24V DC, 8 A |
| Enclosure Rating | IP 20, Cabinet |
| Electrical Isolation | 400V AC |
| Reinforced Isolation | 240V AC |
| LED Indicators | Yes |
| Temperature Rating | -25 to 55 degrees Celsius |
| Compliance | c-UL-us, CE, CL1DIV2, C-Tick, and CSA |
About 1760-OW2
The Allen-Bradley 1760-OW2 Module is an expansion module with 2 relay outputs, and it operates on 10 Amps of current and 240 Volts AC, or 8 Amps and 24 Volts DC. It supports the screw mounting and DIN Rail mounting options, as well as the use of AWG 22 to 12 wire. This module has LED indicators to show the output status, and an IP 20 enclosure rating. The 1760-OW2 Expansion Module features an operating temperature range of -25 to 55 degrees Celsius and is rated and approved for compliance with the c-UL-us, CE, CL1DIV2, C-Tick, and CSA standards. This expansion module is connected to the Pico controller, an electronic controller with built-in logic, counter, real-time, and timer functions. It is intended to increase the I/O capacity of a module, and it comes with parts such as A write-on surface and outputs.
The Allen-Bradley 1760-OW2 Pico Expansion Module features an output that comprises 2 relays and 24 Volts DC line power. However, the expansion module and the Pico controller do not necessarily need to have the exact same type of voltage to be compatible. This module is connected to the Pico controller directly, and this direct connection is achieved through an electrical isolation of 400 Volts AC, with 240 Volts AC of reinforced isolation which is provided between the controller and the expansion module to help provide the minimum required protection level against electrical shocks. The 1760-OW2 Expansion Module has an easy installation process. Once it connects to the Pico controller, it can be installed in a cabinet or an enclosure that protects the terminals and power feeds while the module is running.
The 1760-OW2 Expansion Module by Allen-Bradley comes with 2 relay outputs. It runs on power ratings of 240 Volts AC, 10 Amps, and 24 Volts DC, 8 Amps.
F.A.Q for 1760-OW2
