GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-LDFCA
1760-LDFCA
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-LDFCA 1760-LDFCA//A
Common misspellings:
- l760-LDFCA
- 176o-LDFCA
- 1760-1DFCA
- 1760LDFCA
Technical Specifications for 1760-LDFCA
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-LDFCA |
| Type | Processor |
| Voltage type | AC |
| Voltage range | 120-240V AC |
| Input current | 50/60 Hertz |
| Maximum I/O | 36 |
| Pico-link | Yes |
| Width | 107.5 mm |
| Height | 90 mm |
| Depth | 30 mm |
| Mounting | Display shaft, DIN Rail |
About 1760-LDFCA
The 1760-LDFCA processor is an AC processor with a Pico-link terminal that comes in the 1760 product line of Pico GFX-70 controllers made by Allen-Bradley. This specific controller operates with AC voltage and it can work with up to 36 inputs or outputs. If the number of I/O in the system is higher than that, it is recommended to use a Pico-link module to accommodate all of the I/O. This processor can be used in a series within a Pico network. No more than 8 Allen-Bradley 1760-LDFCA AC processors with Pico-link terminals can be used in a network, and this network has different bus lengths and corresponding transmission speeds, for example, a bus length of 6 meters and a transmission speed of 1000 kBaud or a bus length of 1000 meters and a transmission speed of 10 kBaud. Electrical isolation is provided between the processor and the power supply, inputs, outputs, expansion I/O, PC interface, and memory module.
The Allen-Bradley 1760-LDFCA AC processor with a Pico-link terminal can be used in an ambient operating temperature range of -25 to 55 degrees Celsius and it can be installed in either a horizontal or vertical position without either position affecting its functioning. The buildup of condensation on or around the device needs to be prevented in humid environments. The relative humidity range that the device can tolerate is 5 to 95 percent without condensation and the air pressure during operations of 795 to 1080 hPa. The Allen-Bradley 1760-LDFCA AC processor with a Pico-link terminal includes a real-time clock with an accuracy rating of 5 seconds per day, approximately. It has an approximate shipping weight of 145 grams and it operates with an AC voltage range from 120 to 240 Volts AC.
The Allen-Bradley 1760-LDFCA AC processor with a Pico-link terminal enables users to use this processor in a series with different processors. This setup is made possible by using the Pico-link technology.
F.A.Q for 1760-LDFCA
