GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-L18NWN-EX
1760-L18NWN-EX
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-L18NWN-EX 1760-L18NWN-EX//A1760-L18NWN-EX//B
Common misspellings:
- l760-L18NWN-EX
- 176o-L18NWN-EX
- 1760-118NWN-EX
- 1760-Ll8NWN-EX
- 1760-L1bNWN-EX
- 1760L18NWNEX
Technical Specifications for 1760-L18NWN-EX
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-L18NWN-EX |
| Product type | Controller |
| Number of inputs | 12 |
| Number of outputs | 6 |
| Voltage type | AC |
| Fuse protection | Supported |
| Frequency | 50 to 60 Hertz |
| Nominal voltage | 24 Volts AC |
About 1760-L18NWN-EX
The 1760-L18NWN-EX Pico controller is an Allen-Bradley-manufactured Pico controller that uses AC power. It comes with a nominal AC voltage rating of 24 Volts. This controller is a combination I/O controller which features 12 inputs and 6 outputs for a total of 18 I/O points. The inputs are 24 Volts AC rated outputs and the outputs are all relays. The line power rating of the 1760-L18NWN-EX Pico controller is 24 Volts AC. It features a keypad, a display screen, and a real-time clock. The operating voltage range for this controller runs from 20.4 to 26.4 Volts AC at a frequency of 50 to 60 Hertz. The nominal line current rating is 300 milliamps at 24 Volts AC and at 50 to 60 Hertz.
The Allen-Bradley 1760-L18NWN-EX Pico controller has electrical isolation to the outputs, but it does not have isolation between the inputs or to the power supply. The sinusoidal rated voltage range is 0 to 6 Volts AC in the off-state and 14 to 26.4 Volts AC in the on-state. When cables are connected to the inputs on the 1760-L18NWN-EX Pico controller, the maximum length for the cable is 131 feet or 40 meters. It is not possible to connect any of the outputs on the 1760-L18NWN-EX controller in parallel to increase their output. The outputs can be protected with either an 8 Amps slow fuse or a miniature circuit breaker. This controller can handle approximately 10 million mechanical switching operations and up to 10 Hertz of mechanical switching frequency. Its inductive load rating is 0.5 Hertz.
The Allen-Bradley 1760-L18NWN-EX Pico controller uses 12 inputs and 6 outputs to control other devices. The controller can be monitored and configured with its built-in keypad and display screen.
F.A.Q for 1760-L18NWN-EX
