GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-DU
1760-DU
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-DU 1760-DU//A
Common misspellings:
- l760-DU
- 176o-DU
- 1760DU
Technical Specifications for 1760-DU
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-DU |
| Description | LCD display |
| IP rating | IP 65 |
| Voltage | 24 Volts DC |
| Current | 250 milliamps |
| Resolution | 132 x 64 pixels |
| LED indicators | Yes |
| Keypad | Yes |
| Temperature | -20 to 55 degrees Celsius |
About 1760-DU
The 1760-DU display is an LCD display unit manufactured by Allen-Bradley. It is a graphical display unit and it offers different features. It is a programmable unit that acts as a human-machine interface module and it interfaces with the operators, provides switching, closed loop, and open loop control functions, and it can replace older relay and contactor controls. The 1760-DU display is certified with an IP 65 protection rating; it is water-resistant and does not require external housing. It can be used safely in outdoor locations. The 1760-DU display can be mounted from the rear side and it can be installed within an enclosure, control cabinet, or a distribution service board. The power and signal terminals are designed to prevent hazards.
The resolution of the 1760-DU display is 132 x 64 pixels and it has an area of 62 x 33 millimeters. This monochrome LCD panel runs with a voltage rating of 24 Volts DC and current of 250 milliamps. Two LED indicators are present on top of the display unit that show the status of power and the RUN/STOP operating modes of the unit. The 1760-DU display has buttons to perform different functions. It comes with cursor buttons for navigation, a “DEL” button to delete objects, an “ALT” button for special functions, an “OK” button for the next menu page or to save an entry, and an “ESC” button to cancel the command or switch to the previous menu page. The display unit is able to display graphics, texts, variables, and flashing values. It can run arithmetic operations and output the manipulated variables as pulse width modulated signals.
The 1760-DU display is an Allen-Bradley display unit for thr 1760 Pico controllers. It has a current rating of 250 milliamps.
F.A.Q for 1760-DU
