GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Pico Controllers » You are here: 1760-CBL-PC02
1760-CBL-PC02
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1760-CBL-PC02 1760-CBL-PC02//A
Common misspellings:
- l760-CBL-PC02
- 176o-CBL-PC02
- 1760-C8L-PC02
- 1760-CB1-PC02
- 1760-CBL-PCo2
- 1760CBLPC02
Technical Specifications for 1760-CBL-PC02
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Pico Controllers |
| Part number | 1760-CBL-PC02 |
| Product type | Cable |
| Software | PicoSoft Pro software |
| Compatible devices | PCs and Pico controllers |
| Operating temperature | -13 to 131 degrees Fahrenheit |
| Storage temperature | -40 to 158 degrees Fahrenheit |
| ESD tolerance | 8 kilovolts of air discharge, 6 kilovolts of contact discharge |
| Relative humidity | 5 to 95%, non-condensing |
About 1760-CBL-PC02
The 1760-CBL-PC02 cable has been manufactured by Allen-Bradley as a cable for the Allen-Bradley/Rockwell Automation Pico Controllers. The 1760-CBL-PC02 cable can be used to connect a PC to a Pico Controller processor so that the PC can be used to program the processor and so that the devices can exchange data.
The Allen-Bradley Pico Controller 1760-CBL-PC02 cable can be used in industrial environments with an ambient temperature range of -25 to 55 degrees Celsius or -13 to 131 degrees Fahrenheit. It should not be used in environments with high levels of moisture or condensation, although it can tolerate non-condensing relative humidity levels between 5 and 95%. If the 1760-CBL-PC02 cable is not being used, it can be stored safely in a dry environment with an ambient temperature range between -40 and 70 degrees Celsius or -40 to 158 degrees Fahrenheit. This cable can be safely used in environments with a Pollution Degree 2 pollution rating. The 1760-CBL-PC02 cable and the devices that it connects should be protected from ESD (electrostatic discharge) as much as possible, but they can withstand about 8 kilovolts of air discharge and about 6 kilovolts of contact discharge.
The Allen-Bradley 1760-CBL-PC02 cable is made for the Pico Controllers and the PicoSoft Pro software. It allows the Pico Controllers to communicate with a PC.
F.A.Q for 1760-CBL-PC02
