GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » MicroLogix 1200 » You are here: 1762sc-IF4OF4
1762sc-IF4OF4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1762sc-IF4OF4 1762sc-IF4OF4//A
Common misspellings:
- l762sc-IF4OF4
- 1762sc-1F4OF4
- 1762sc-lF4OF4
- 1762sc-IFAOF4
- 1762sc-IF40F4
- 1762sc-IF4OFA
- 1762scIF4OF4
Technical Specifications for 1762sc-IF4OF4
| Manufacturer | Spectrum Controls |
|---|---|
| Product Family: | MicroLogix 1200 |
| Product Type: | Analog Input / Output Module |
| Part Number/Catalog No. | 1762sc-IF4OF4 |
| Inputs signal Types: | Two (2) Current inputs compatible for 0-20 mA, 4-20 mA; Two (2) selectable inputs compatible for 0-20 mA, 4-20 mA, 0-5 V, 1-5V, 0-10 V, ±10 V and Thermocouple types J, K, E, T |
| Outputs signal Types: | Two (2) Analog Voltage and Current 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0- 10 V, ±10 V |
| Input / Output current range: | 3.92 to 20.4 mA; 0 to 20.4 mA |
| Input / Output voltage range: | 0 to 5.5 V; 0 to 5.5 V; -11 to +11 V; 0 to 11 V |
| Resolution: | 16 Bit |
| Converter Type: | Delta Sigma |
| Input filters: | 4 Hz, 17 Hz, 62 Hz, and 470 Hz |
| Sampling Times: | 495ms, 135ms, 45ms and 20ms |
| Supported Controllers: | MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 |
| Module Instance: | MicroLogix1100: 4 modules; 24 pt MicroLogix 1200: 3 modules 40 MicroLogix 1200: 3 modules MicroLogix 1400: 7 modules |
| Temperature, nonoperating: | -20 ¡C to 60 ¡C (-4 ¡F to 140 ¡F) |
| Storage Temperature: | -40 ¡C to 85 ¡C (-40 ¡F to 185 ¡F) |
| Weight: | 281 g (9.9 ozs) |
About 1762sc-IF4OF4
The 1762sc-IF4OF4 is an encompass partner module, manufactured by Spectrum Controls. This module is a combination input and output module which supports a wide variety of signals such as Two (2) Current inputs compatible for 0-20 mA, 4-20 mA, Two (2) selectable inputs compatible for 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V, ±10 V and Thermocouple types J, K, E, T. It also has Four (4) Voltage / Current outputs compatible for 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V, ±10 V signal types. Channels 4 and 5 are dedicated Current input channels while Channels 6 and 7 are configurable for Current and Voltage as well as Thermocouple inputs. This module is a cost-effective solution due to its compatibility with a variety of input and output signals. It is also for use in temperature applications as Thermocouple sensors are practically used for temperature applications. The module has 16-bit resolution, with integrated open circuit detection which may be used to detect the health of connected instrument and further integrated to control systems for instrument and signal monitoring. This integral channel health detection may also be used as an interlock to implement control mode changes. Each channel is also equipped with Four (4) selectable filter frequencies such as 4Hz, 17Hz, 62Hz, and 470Hz and adjustable sampling times of 495ms, 135ms, 45ms and 20ms. The received input signals may be assigned with internal data format such as engineering units x1, Engineering units x 10, Scaled for PID and Raw / Proportional data while the output channels may be similarly assigned with the same formats with an additional option of Percent Range data format. The process temperature range to which the module may be used are -200 to 1000 ûC (-328 to 1832 ûF), equivalent for Thermocouple Type E, -180 to 1200 ûC (-292 to 2192 ûF) for Thermocouple Type J, -200 to 1370 ûC (-328 to 2498 ûF) for Thermocouple Type K and -190 to 400 ûC (-310 to 752 ûF) for Thermocouple Type T. Similar to Allen-Bradley made MicroLogix expansion modules, the 1762sc-IF4OF4 communicate to the processors by establishing connection to the MicroLogix bus to receive 5VDC and 24VDC voltages, to energize and perform the moduleÕs designed operation. Physical connection is established via the provided flat ribbon cable that comes with the module. Each channel of the 1762sc-IF4OF4 module supports differential and single ended input wiring. It is also equipped with a Cold-Junction Compensation (CJC) terminal intended for Thermocouple inputs, enabling accurate reading. If used with 2-wire transmitters, provide an external power supply as the module is not capable of providing loop power signal. Analog inputs are processed via an internal Delta-Sigma analog to digital conversion. This converter is responsible for converting the analog signal to 16-bit digital values for storage to the moduleÕs local memory. This conversion is applicable for voltage and current inputs. If Thermocouple is used, the compensator continuously updates, corrects, and compensate the temperature reading. The output channels also use Digital to analog output signal converter.F.A.Q for 1762sc-IF4OF4
| Q: 1. What does the ÒscÓ in the catalog number stand for? | A: It stands for Spectrum Controls, the manufacturer of the module. This module is not locally made by Allen-Bradley instead, an encompass partner, certified by Allen- Bradley creates modules and other products compatible for Allen-Bradley devices. |
|---|---|
| Q: 2. It this module compatible with MicroLogix 1200 controllers? | A: Yes, its compatibility is the same with Allen-Bradley made MicroLogix I/O expansion modules. It supports MicroLogix 1100, 1200 and 1400 controllers. |
| Q: 3. What are the supported thermocouple sensors by this module? | A: Supported Thermocouples are Type J,K,E and T. |
PDFsupply Tech
The 1762sc-IF4OF4 is an encompass partner module manufactured by Spectrum Controls. This is a combination module that features high resolution input conversion, which also supports a variety of input and output signals particularly Voltage, Current and millivolt signals. Compared to Allen-BradleyÕs 1762-IF2OF2 which is an medium resolution, analog and voltage module, the 1762sc-IF4OF4 offers more flexibility due to its support for a variety of signal types.
