GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » MicroLogix 1200 » You are here: 1762SC-OF8
1762SC-OF8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1762SC-OF8 1762SC-OF8//A
Common misspellings:
- l762SC-OF8
- 1762SC-0F8
- 1762SC-OFb
- 1762SCOF8
Technical Specifications for 1762SC-OF8
| Manufacturer | Spectrum Controls |
|---|---|
| Product Family: | MicroLogix 1200 |
| Product Type: | Analog Output Module |
| Part Number/Catalog No. | 1762SC-OF8 |
| No. of channels: | 8 Channels |
| Output signal Types: | Voltage, Current |
| Compatible Current signals: | 0-20 mA, 4-20 mA |
| Compatible Voltage Signals: | ±50 mV, ±100 mV, 0 to 5 V, 1 to 5, V ±10 V and 0 to 10V |
| Resolution: | 16 bits |
| Selectable Data Formats: | PID, Engineering Units, Raw Count, Percent of Range |
| Resolution: | 16 Bits |
| Output Accuracy: | ±20 mV at 25 ¡C; ±50 uA at 25 ¡C |
| Backplane Current: | 30 mA at 5 V; 250 mA at 18.7 V; 195 mA at 24 V |
| Supported Controllers: | MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 |
| Module Instance: | MicroLogix1100: 3 modules; 24 pt MicroLogix 1200: 1 modules 40 MicroLogix 1200: 2 modules MicroLogix 1400: 6 modules |
| Operating Temperature: | -20 ¡C to 60 ¡C (-4 ¡F to 140 ¡F) |
| Storage Temperature: | -40 ¡C to 85 ¡C (-40 ¡F to 185 ¡F) |
| Weight: | 281 g (9.9 ozs) |
About 1762SC-OF8
The 1762sc-OF8 is a MicroLogix 1200 expansion module. This module is manufactured by Allen-Bradley encompass partner, Spectrum controls. Encompass partner companies of Allen-Bradley are recognized partners that are certified to create products compatible with existing Allen-Bradley products. This output module is a high-density output module and may be used to replace low density analog output module to meet process control requirements. Each channel support unipolar and bipolar signal output ranges. The 1762sc-OF8 features Eight (8) output channels, selectable for Voltage or Current. This module is compatible for signal ranges 0-5 V, 1-5 V, 0-10 V, ±10 and 0-20 mA, 4-20 mA. The moduleÕs settling time is <1 ms to 63% of full scale and output accuracy is ±20 mV at 25 ¡C; ±50 uA at 25 ¡C. Analog output modules are generally used for implementing modulating control, typically used with Modulating Control Valves, Variable Frequency Drives (VFD), Positioners, Signal converters and other devices. It may also be used to re-transmit signals for display of analog indicators, recorders, totalizers, isolators among others. The analog output signal is capable of being linked to manual data entry hardware for direct and manual control, similarly it may also be linked to computer-based data entry components. Aside from these manual entry components, the analog output may also be the result of a mathematical equation or compare instructions. In automatic control systems, the analog output is linked to the output of a Proportional + Integral +Derivative (PID) controller to implement automatic and modulating control of devices. This module has a conversion resolution of 16 bits with selectable data formats of Engineering Units, Scaled for PID, Raw / Proportional Data and Percent of Full range. This output module has an embedded LED indicator to display the status of the module. This indicator is a Single Greed LED indicator, that is normally solid lit when the module is in run mode. An improperly configured module has a rapidly blinking LED. Additionally, there are other blink codes used by the module. Factory Calibration in progress is indicated by 3 successive blinks, invalid calibration has 4 successive blinks and 5 successive blinks refer to module is in command mode state. The 1762SC-OF8 carries certification from UL/cUL (Class I, Div 2, Groups ABCD), and CE certifying agencies. The moduleÕs environmental specifications include an operating temperature of -20 ¡C to 60 ¡C (-4 ¡F to 140 ¡F), storage temperature of -40 ¡C to 85 ¡C (-40 ¡F to 185 ¡F) and relative humidity of 5% - 95% (non-condensing). It has thermal dissipation of 4.9 Watts, maximum. Install the analog output module to a DIN rail of directly to the mounting plate. The moduleÕs backplane current requirements are 30 mA at 5 V, 250 mA at 18.7 V, 195 mA at 24 V. The module connects to the MicroLogix bus via the provided ribbon cable which directly attaches to any adjacent MicroLogix expansion module or the controller base.F.A.Q for 1762SC-OF8
| Q: 1. What are the output signal types supported by the 1762sc-OF8? | A: The 1762sc-OF8 is capable of providing 0-5 V, 1-5 V, 0-10 V, ±10 and 0-20 mA, 4-20 mA. |
|---|---|
| Q: 2. What is the output resolution of the 1762sc-OF8? | A: The 1762sc-OF8 has conversion resolution of 16 bits and output accuracy of ±20 mV at 25 ¡C; ±50 uA at 25 ¡C. |
| Q: 3. Can the 1762sc-OF8 replace the 1762-OF4 module? | A: Yes, the module may be used to replace the 1762-OF4 module however, hardware reconfiguration must be done. |
PDFsupply Tech
The 1762sc-OF8 is a high-density output module. This module has a relatively high resolution of 16 bit with an increased number of channels of Eight (8) channels. Compared to the 1762-OF4 which has Four (4) channels only and 12 bit resolution, the 1762sc-OF8 proves to be an excellent function upgrade and direct replacement to the 1762-OF4.
