GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » MicroLogix 1200 » You are here: 1762-OB32T
1762-OB32T
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1762-OB32T 1762-OB32T//A
Common misspellings:
- l762-OB32T
- 1762-0B32T
- 1762-O832T
- 1762OB32T
Technical Specifications for 1762-OB32T
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Family: | MicroLogix 1200 |
| Product Type: | Discrete Output Module |
| Part Number: | 1762-OB32T |
| No. of Inputs: | 32 |
| No. of Groups: | 2 groups |
| Output Groups: | Group 1: Outputs 0É15 Group 2: Outputs 16-31 with internally connected commons |
| Voltage Category: | 24VDC |
| Output Voltage Range: | 10.2-26.4VDC |
| Compatible Controllers: | MicroLogix 1100, 1200 and 1400 |
| Signal delay, On: | 0.5 ms |
| Signal Delay, Off: | 4.0 ms |
| Bus current draw, max: | 175 mA @ 5V DC 0 mA @ 24V DC |
| Dimensions, HxWxD: | 90 x 40.4 x 87 mm (height including mounting tabs is 110 mm) 3.54 x 1.59 x 3.43 in. (height including mounting tabs is 4.33 in.) |
About 1762-OB32T
The 1762-OB32T is a High-Density output module that belongs to the1762 MicroLogix product family. This expansion module is a Solid-State electronic device that boasts of noise immunity, no mechanical switching parts, faster ON and OFF reaction time, and efficient operation. It is ideal for use in automation requirements with High-density I/Os. This module requires the use of any termination base as it uses an Allen-Bradley made 1746-N3 which may also be locally fabricated. One end on the 1746-N3 is a quick connect keyed female connector while the other end are flying leads that may be wired to any terminal blocks and termination strip. This module has Two (2) output groups. Output group 1 is composed of channels 0-15 while output group 2 is composed of output channels 16-31. Each channel of this module operates at a nominal voltage of 24VDC with an operating range of 10.2 - 26.4 VDC. This module is a sourcing output module which mean the + of the 24VDC external supply is terminated to the +VDC of the module while the - terminal of the external supply is wired to the DC COM. Sourcing wiring simply indicates the flow of Current between the module and the instrument connected to the channel. Field device wire connect to the negative terminal of the module while the moduleÕs positive channel terminal connects to the field device + terminal. Use 22...26 AWG wire and strip at a maximum length of 4 mm or 5/32 inches. Insert the stripped wire individually to the wire barrel and solder together using lead-free solder and soldering pencil. This register is accessible through the Output Data Files. The moduleÕs operating temperature is -20... 60 ¡C or -4...140 ¡F. Use this parameter to decide on the proper cooling or heating component. Additionally, the module has a Heat Dissipation of 3.4W @ 26.4V DC. To help control temperature within the panel, maintain an installation clearance of 2-inches on all sides of the module for proper air flow. This clearance applies to any adjacent component such as wireways, enclosure wall, nearby electrical component and other panel devices. Other parameters of the module include physical dimension of 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.), shipping weight 200 g (7.05 oz). The bus current draw of the module is 175 mA @ 5V DC 0 mA @ 24V DC. Storage temperature of the module is -40É85 ¡C (-40É185 ¡F).F.A.Q for 1762-OB32T
| Q: 1. What is the difference of the 1762-OB16 and 1762-OW16? | A: The main difference is the operating voltage. The 1762-OB16 is designed for energizing DC loads rated 24VDC while the 1762-OW16 are designed for 5-125 VDC or 120 / 240 VAC loads. |
|---|---|
| Q: 2. Can I fabricate the 1746-N3 cable? | A: Yes, it can be fabricated following the pinouts specified in the moduleÕs installation manual. |
| Q: 3. What is the mounting clearance of the 1762-OB32T? | A: The mounting clearance of the 1762-OB32T is 2 inches on all sides of the module. |
PDFsupply Tech
The 1762-OB32T is a High-density, solid state, 24VDC output module. This output module uses a 1746-N3 cable assembly with a connector on one end that directly mounts to the module while the other ends are flying leads. Using this cable, the module is may be remotely terminated. Compared to the 1762-OB16 which has 16 outputs only, the 1762-OB32T offers a more advanced specification set and maximizes the supported slot of any MicroLogix controller.
