GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » MicroLogix 1200 » You are here: 1762-L24BXBR
1762-L24BXBR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1762-L24BXBR 1762-L24BXBR//A1762-L24BXBR//B1762-L24BXBR//C
Common misspellings:
- l762-L24BXBR
- 1762-124BXBR
- 1762-L2ABXBR
- 1762-L248XBR
- 1762-L24BX8R
- 1762L24BXBR
Technical Specifications for 1762-L24BXBR
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Type: | MicroLogix 1200 Controller |
| Part Number: | 1762-L24BXBR |
| Number of I/O: | 24 |
| Number of Inputs: | Ten (10) 24VDC standard, Four (4) Fast 24VDC inputs |
| Input Operating Range: | 14É26.4V DC max @ 55 ¡C (131 ¡F) 14É30.0V DC max @ 30 ¡C (86 ¡F |
| Number of outputs: | Five (5) Relay outputs, Four (4) 24VDC FET and One (1) High- speed |
| Relay Output operating range: | 5 - 125V DC / 5 - 264V AC |
| MOSFET output operating Range: | 20.4 - 26.4V DC |
| High-Speed output operating Range: | 20.4 - 26.4V DC |
| Power supply: | 20.4 - 26.4V DC |
| Nominal Input Voltage: | 24VDC |
| Inrush current: | 15A for 20 ms |
| Communication port: | One (1) RS232 / RS485 combo port; One (1) Programmer port |
| Communication protocol: | DH485, DF1 Full-Duplex, DF1 Half Duplex, DF1 Radio Modem, MODBUS Master / Slave and ASCII protocols. |
| Accessory components: | 1762-MM1; 1762-RTC; 1762-MM1RTC |
| Programming Software: | RSLogix 500 |
About 1762-L24BXBR
The 1762-L24BXBR is a MicroLogix 1200 Programmable Logic Controller (PLC). This hardware, manufactured by Allen-Bradley is designed to fit tight spaces, ideal for automating industrial applications. The embedded features of this controller is capable of controlling discrete control loops, whether in manual or automatic mode. It may be used in motor control applications, electro-pneumatic controls, migration of conventional electrical panels to solid-state, microprocessor based control which are common components of processes and machine automation. The 1762-L24BXBR is designed with a variety of input and output types particularly Ten (10) 24VDC standard inputs, Four (4) Fast 24VDC inputs, Five (5) Relay outputs, Four (4) 24VDC FET and One (1) High-speed output channels. This combination of I/O types allows the controller in a much broader of scope. The standard inputs may be used in typical applications, while the fast inputs are compatible for high-speed counting applications in the manufacturing industry, in metering system applications for totalizing applications and integration of field devices with fast switching frequency. The relay outputs are already a flexible set of outputs, being compatible with 5-125VDC or 120/240VAC electrical loads while the FET output channels can provide 24VDC outputs with an operating range of 20.6-26.4 VDC. It is also installed with a single High-speed output which allow the controller to retransmit the signal and act as a metering device itself. The 1762-L24BXBRÕs physical dimensions are 90 mm, and 104 mm with DIN latch open for Height, Width of 110 mm, and Depth of 87 mm. Install the controller to a DIN rail or directly to a panel. Select direct panel mounting of the installation location is experiencing vibration, however, Allen-Bradley also manufactures a DIN rail end anchors with catalog numbers 1492-EA35 or 1492-EAH35. Operating vibration and shock of the controller is 10 to 500 Hz, 5G, 0.030 in. max. peak-to-peak, 2 hours each axis and 30G; 3 pulses each direction, each axis respectively. Maintain 2-inches clearance on all sides of the controller, with reference to the nearby enclosure components such as wire ducts, enclosure walls, electrical loads, and other components. Maintaining this clearance permits natural air flow for component cooling. Additionally, the enclosure temperature must be within +0¡C to +55¡C or +32¡F to +131¡F and humidity of 5% to 95% relative humidity (non-condensing). The 1762-L24BXBR boasts an internal memory of 6KB with an allocation of 4KB for User Program and 2KB for Program Data. The controller supports automatic loading of a program from a non-volatile memory by separately purchasing 1762-MM1 Memory Module, 1762-MM1RTC Memory Module. If intended to use for an accurate time and date automation application, add a Real-Time Clock module with catalog number 1762-RTC or 1762-MM1RTC. This controller is also provided with an 8-Pin mini DIN RS232 / RS485 combo port that supports DH485, DF1 Full-Duplex, DF1 Half Duplex, DF1 Radio Modem, MODBUS Master / Slave and ASCII protocols. RS232 is designed for peer-to-peer communication, commonly used for programming actions such as upload, download, test, online edits of user program. This port may also be used to communication with communication with partner electronic devices. This controller is provided with secondary programmer port which is primarily intended to carry out programming functions.F.A.Q for 1762-L24BXBR
| Q: 1. Do this controller support networked communication? | A: Yes, the integrated combo port supports RS485 which supports multi-partner communication. If needed to communicate to DeviceNet, DH485 and Ethernet communication network. |
|---|---|
| Q: 2. Can I performing scheduling function with this controller? | A: Yes, especially if used with the 1762-RTC or 1762-MM1RTC. It provides an accurate time base and date reference. |
| Q: 3. What is the input voltage supply requirement of this controller? | A: The input supply requirement is 20.4Ð26.4VDC. |
PDFsupply Tech
The 1762-L24BXBR is a MicroLogix 1200 controller with an additional programmer port. This controller functions similarly compared to the 1762-L24BXB. It has the same number or I/O channels with the inclusion of the additional programmer port to allow an alternative means of carrying out programming functions without the need of removing the existing cable connected to the primary communication port.
