GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » MicroLogix 1200 » You are here: 1762-IQ16
1762-IQ16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1762-IQ16 is a MicroLogix Expansion module with Sixteen (16) 24VDC sinking and sourcing input channels. This module operates at an analog Voltage Range of 10 - 30V DC or 10 - 26.4V DC. This module is compatible with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 product family.Other Available Revisions for the 1762-IQ16 1762-IQ16//A1762-IQ16//B
Common misspellings:
- l762-IQ16
- 1762-1Q16
- 1762-lQ16
- 1762-IQl6
- 1762IQ16
Technical Specifications for 1762-IQ16
| Manufacturer: | Rockwell Automation |
|---|---|
| Brand: | Allen-Bradley |
| Product Description: | MicroLogix Expansion I/O Module |
| Product Type: | Discrete Input Module |
| Part Number: | 1762-IQ16 |
| No. of Inputs: | 16 |
| No. of Groups: | 2 groups (8 inputs each) |
| Voltage Category: | 24V DC sink/source |
| Input Voltage Range: | 10 - 30V DC or 10 - 26.4V DC |
| Compatible Controllers: | MicroLogix 1100, 1200 and 1400 |
| Off-state Voltage: | 5V DC |
| On-state Voltage: | 10V DC |
| Input delay, On: | 8 ms |
| Input Delay, Off: | 8 ms |
| Bus current draw, max: | 70 mA @ 5V DC (0.35 W) |
| Dimensions, HxWxD: | 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.) |
About 1762-IQ16
The 1762-IQ16 is a MicroLogix I/O expansion module. This module features Sixteen (16) input channels with each channel operating at voltage category of 24VDC. This module supports sinking and sourcing wiring configuration and has Two (2) input groups of Eight (8) channels each. Input group 1 is composed of channels 0, 1, ,2 ,3 ,4 ,5 ,6 ,7 while Group 2 include channels 8, 9, 10, 11, 12, 13, 14, 15. This module is supported by MicroLogix Controllers such as MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400. This expansion module features a rackless design with integrated finger-safe terminal and provided with writable labels to record and mark channel designations. Up to Four (4) 1762-IQ16 may be used with a MicroLogix 1100, Six (6) with MicroLogix 1200 and Seven (7) for MicroLogix 1400. This module occupies Sixteen (16) bits or 1 Word. Each bit are Read only type. Each channel of the module may be used to integrate switching or binary operating devices, with ON/OFF positions only. By wiring signaling devices such as switches, sensors, auxiliary contacts, and other electrical and electronic switching devices. Each channel of the 1762-IQ16 has individual ON signal delay of 8.0 ms and OFF signal delay of 8.0 ms. It has a minimum ON state voltage of 10VDC and maximum OFF state voltage 5VDC.The maximum OFF state current is 1.5 mA and ON state current which varies depending on the voltage level. This module does not require an external power supply. It draws power to the backplane via the provided flat ribbon cable. The moduleÕs current draw is 70 mA @ 5V DC (0.35 W). It has a heat dissipation of 5.4 Total Watts @ 30V DC or 4.3 Total Watts @ 26.4V DC. The 1762-IQ16 is installed along the main MicroLogix module. This module supports DIN rail installation. Appropriate DIN rail for this module measures 35 x 7.5 mm (EN 50 022 - 35 x 7.5) or 35 x 15 mm (EN 50 022 - 35 x 15). Direct panel mounting is also supported. Panel mounting method is best used when an increased shock and vibration is present. This module has an operating vibration and shock ratings of 5 g @ 10... 500 Hz and 30 g respectively. The moduleÕs dimension is 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.) and weighs 230g (8.11oz). Maintain Two (2) inches clearance on all sides of the module to promote proper air flow and natural cooling. Use #14 - 22 AWG Solid wire or #16 - 22 AWG Stranded wire when terminating signal wires to the module. Recommended insulation rating is Cu-90 ¡C (194 ¡F) and required terminal screw torque is 0.90 Nm (8 lb-in.).F.A.Q for 1762-IQ16
| Q: 1. What are the dimensions of this expansion module? | A: The dimensions of this expansion modules are 90 x 40.4 x 87 mm (H x W x D). |
|---|---|
| Q: 2. How does the 1762-IQ16 connect to the controller or other module? | A: Connection to the other modules or controller is made via the supplied flat ribbon cable supplied with the module. |
| Q: 3. Can I wire 120 VAC signals to this module? | A: By direct wiring, it is not possible. If used with an interposing circuit, this module may be used. |
PDFsupply Tech
The 1762-IQ16 is a MicroLogix expansion module that features sixteen 24VDC input channels. This module is specifically used for devices operating at voltage category of 24VDC only. This module supports sourcing and sinking wiring configuration unlike the 1762-IA8 which supports sinking configuration only. This module has higher input channel density compared to the 1762-IQ8.
